| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: Fix ECMP sibling count mismatch when clearing RTF_ADDRCONF
syzbot reported a kernel BUG in fib6_add_rt2node() when adding an IPv6
route. [0]
Commit f72514b3c569 ("ipv6: clear RA flags when adding a static
route") introduced logic to clear RTF_ADDRCONF from existing routes
when a static route with the same nexthop is added. However, this
causes a problem when the existing route has a gateway.
When RTF_ADDRCONF is cleared from a route that has a gateway, that
route becomes eligible for ECMP, i.e. rt6_qualify_for_ecmp() returns
true. The issue is that this route was never added to the
fib6_siblings list.
This leads to a mismatch between the following counts:
- The sibling count computed by iterating fib6_next chain, which
includes the newly ECMP-eligible route
- The actual siblings in fib6_siblings list, which does not include
that route
When a subsequent ECMP route is added, fib6_add_rt2node() hits
BUG_ON(sibling->fib6_nsiblings != rt->fib6_nsiblings) because the
counts don't match.
Fix this by only clearing RTF_ADDRCONF when the existing route does
not have a gateway. Routes without a gateway cannot qualify for ECMP
anyway (rt6_qualify_for_ecmp() requires fib_nh_gw_family), so clearing
RTF_ADDRCONF on them is safe and matches the original intent of the
commit.
[0]:
kernel BUG at net/ipv6/ip6_fib.c:1217!
Oops: invalid opcode: 0000 [#1] SMP KASAN PTI
CPU: 0 UID: 0 PID: 6010 Comm: syz.0.17 Not tainted syzkaller #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/25/2025
RIP: 0010:fib6_add_rt2node+0x3433/0x3470 net/ipv6/ip6_fib.c:1217
[...]
Call Trace:
<TASK>
fib6_add+0x8da/0x18a0 net/ipv6/ip6_fib.c:1532
__ip6_ins_rt net/ipv6/route.c:1351 [inline]
ip6_route_add+0xde/0x1b0 net/ipv6/route.c:3946
ipv6_route_ioctl+0x35c/0x480 net/ipv6/route.c:4571
inet6_ioctl+0x219/0x280 net/ipv6/af_inet6.c:577
sock_do_ioctl+0xdc/0x300 net/socket.c:1245
sock_ioctl+0x576/0x790 net/socket.c:1366
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl+0xfc/0x170 fs/ioctl.c:583
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xfa/0xf80 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
| In the Linux kernel, the following vulnerability has been resolved:
spi: tegra210-quad: Protect curr_xfer in tegra_qspi_combined_seq_xfer
The curr_xfer field is read by the IRQ handler without holding the lock
to check if a transfer is in progress. When clearing curr_xfer in the
combined sequence transfer loop, protect it with the spinlock to prevent
a race with the interrupt handler.
Protect the curr_xfer clearing at the exit path of
tegra_qspi_combined_seq_xfer() with the spinlock to prevent a race
with the interrupt handler that reads this field.
Without this protection, the IRQ handler could read a partially updated
curr_xfer value, leading to NULL pointer dereference or use-after-free. |
| A vulnerability was found in EFM iptime A6004MX 14.18.2. Affected is the function commit_vpncli_file_upload of the file /cgi/timepro.cgi. The manipulation results in unrestricted upload. The attack may be performed from remote. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| SmarterTools SmarterMail before 9526 allows XSS via MAPI requests. |
| Stored Cross-Site Scripting (XSS) vulnerability in Kubysoft, where uploaded SVG images are not properly sanitized. This allows attackers to embed malicious scripts within SVG files as visual content, which are then stored on the server and executed in the context of any user accessing the compromised resource. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: fixup hang in nvmet_tcp_listen_data_ready()
When the socket is closed while in TCP_LISTEN a callback is run to
flush all outstanding packets, which in turns calls
nvmet_tcp_listen_data_ready() with the sk_callback_lock held.
So we need to check if we are in TCP_LISTEN before attempting
to get the sk_callback_lock() to avoid a deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
pmdomain: imx8m-blk-ctrl: fix out-of-range access of bc->domains
Fix out-of-range access of bc->domains in imx8m_blk_ctrl_remove(). |
| The Frontend File Manager Plugin WordPress plugin through 23.5 allows unauthenticated users to send emails through the site without any security checks. This lets attackers use the WordPress site as an open relay for spam or phishing emails to anyone. Attackers can also guess file IDs to access and share uploaded files without permission, exposing sensitive information. |
| The RSS Aggregator plugin for WordPress is vulnerable to Reflected Cross-Site Scripting via the 'template' parameter in all versions up to, and including, 5.0.10 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that execute if they can successfully trick a user into performing an action such as clicking on a link. |
| In the Linux kernel, the following vulnerability has been resolved:
net: usb: r8152: fix resume reset deadlock
rtl8152 can trigger device reset during reset which
potentially can result in a deadlock:
**** DPM device timeout after 10 seconds; 15 seconds until panic ****
Call Trace:
<TASK>
schedule+0x483/0x1370
schedule_preempt_disabled+0x15/0x30
__mutex_lock_common+0x1fd/0x470
__rtl8152_set_mac_address+0x80/0x1f0
dev_set_mac_address+0x7f/0x150
rtl8152_post_reset+0x72/0x150
usb_reset_device+0x1d0/0x220
rtl8152_resume+0x99/0xc0
usb_resume_interface+0x3e/0xc0
usb_resume_both+0x104/0x150
usb_resume+0x22/0x110
The problem is that rtl8152 resume calls reset under
tp->control mutex while reset basically re-enters rtl8152
and attempts to acquire the same tp->control lock once
again.
Reset INACCESSIBLE device outside of tp->control mutex
scope to avoid recursive mutex_lock() deadlock. |
| There is a misconfiguration vulnerability inside the Infotainment ECU manufactured by BOSCH. The vulnerability happens during the startup phase of a specific systemd service, and as a result, the following developer features will be activated: the disabled firewall and the launched SSH server.
First identified on Nissan Leaf ZE1 manufactured in 2020. |
| A vulnerability has been found in kalcaddle kodbox up to 1.64.05. The impacted element is the function run of the file plugins/fileThumb/lib/VideoResize.class.php of the component Media File Preview Plugin. Such manipulation of the argument localFile leads to os command injection. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Mattermost Desktop App versions <=6.0 6.2.0 5.2.13.0 fail to validate help links which allows a malicious Mattermost server to execute arbitrary executables on a user’s system via the user clicking on certain items in the Help menu Mattermost Advisory ID: MMSA-2026-00577 |
| The WowRevenue plugin for WordPress is vulnerable to unauthorized plugin installation due to a missing capability check in the 'Notice::install_activate_plugin' function in all versions up to, and including, 2.1.3. This makes it possible for authenticated attackers, with subscriber-level access and above, to install arbitrary plugins on the affected site's server which may make remote code execution possible. |
| A security flaw has been discovered in Flos Freeware Notepad2 4.2.22/4.2.23/4.2.24/4.2.25. Affected is an unknown function in the library Msimg32.dll. Performing a manipulation results in uncontrolled search path. Attacking locally is a requirement. The attack's complexity is rated as high. The exploitability is told to be difficult. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability has been found in zhanghuanhao LibrarySystem 图书馆管理系统 up to 1.1.1. This impacts an unknown function of the file BookController.java. The manipulation leads to improper access controls. The attack is possible to be carried out remotely. The exploit has been disclosed to the public and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A flaw has been found in WAYOS FBM-220G 24.10.19. This affects the function sub_40F820 of the file rc. Executing a manipulation of the argument upnp_waniface/upnp_ssdp_interval/upnp_max_age can lead to command injection. The attack can be executed remotely. The vendor was contacted early about this disclosure but did not respond in any way. |
| A flaw has been found in GeekAI up to 4.2.4. The affected element is the function Download of the file api/handler/net_handler.go. This manipulation of the argument url causes server-side request forgery. Remote exploitation of the attack is possible. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| The Micca KE700 system contains flawed resynchronization logic and is vulnerable to replay attacks. This attack requires sending two previously captured codes in a specific sequence. As a result, the system can be forced to accept previously used (stale) rolling codes and execute a command. Successful exploitation allows an attacker to clone the alarm key. This grants the attacker unauthorized access to the vehicle to unlock or lock the doors. |
| The Micca KE700 system relies on a 6-bit portion of an identifier for authentication within rolling codes, providing only 64 possible combinations. This low entropy allows an attacker to perform a brute-force attack against one component of the rolling code. Successful exploitation simplify an attacker to predict the next valid rolling code, granting unauthorized access to the vehicle. |
