| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The SupportCandy – Helpdesk & Customer Support Ticket System plugin for WordPress is vulnerable to SQL Injection via the Number-type custom field filter in all versions up to, and including, 3.4.4. This is due to insufficient escaping on the user-supplied operand value when using the equals operator and lack of sufficient preparation on the existing SQL query. This makes it possible for authenticated attackers, with Subscriber-level access and above (customers), to append additional SQL queries into already existing queries that can be used to extract sensitive information from the database. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: always detect conflicting inodes when logging inode refs
After rename exchanging (either with the rename exchange operation or
regular renames in multiple non-atomic steps) two inodes and at least
one of them is a directory, we can end up with a log tree that contains
only of the inodes and after a power failure that can result in an attempt
to delete the other inode when it should not because it was not deleted
before the power failure. In some case that delete attempt fails when
the target inode is a directory that contains a subvolume inside it, since
the log replay code is not prepared to deal with directory entries that
point to root items (only inode items).
1) We have directories "dir1" (inode A) and "dir2" (inode B) under the
same parent directory;
2) We have a file (inode C) under directory "dir1" (inode A);
3) We have a subvolume inside directory "dir2" (inode B);
4) All these inodes were persisted in a past transaction and we are
currently at transaction N;
5) We rename the file (inode C), so at btrfs_log_new_name() we update
inode C's last_unlink_trans to N;
6) We get a rename exchange for "dir1" (inode A) and "dir2" (inode B),
so after the exchange "dir1" is inode B and "dir2" is inode A.
During the rename exchange we call btrfs_log_new_name() for inodes
A and B, but because they are directories, we don't update their
last_unlink_trans to N;
7) An fsync against the file (inode C) is done, and because its inode
has a last_unlink_trans with a value of N we log its parent directory
(inode A) (through btrfs_log_all_parents(), called from
btrfs_log_inode_parent()).
8) So we end up with inode B not logged, which now has the old name
of inode A. At copy_inode_items_to_log(), when logging inode A, we
did not check if we had any conflicting inode to log because inode
A has a generation lower than the current transaction (created in
a past transaction);
9) After a power failure, when replaying the log tree, since we find that
inode A has a new name that conflicts with the name of inode B in the
fs tree, we attempt to delete inode B... this is wrong since that
directory was never deleted before the power failure, and because there
is a subvolume inside that directory, attempting to delete it will fail
since replay_dir_deletes() and btrfs_unlink_inode() are not prepared
to deal with dir items that point to roots instead of inodes.
When that happens the mount fails and we get a stack trace like the
following:
[87.2314] BTRFS info (device dm-0): start tree-log replay
[87.2318] BTRFS critical (device dm-0): failed to delete reference to subvol, root 5 inode 256 parent 259
[87.2332] ------------[ cut here ]------------
[87.2338] BTRFS: Transaction aborted (error -2)
[87.2346] WARNING: CPU: 1 PID: 638968 at fs/btrfs/inode.c:4345 __btrfs_unlink_inode+0x416/0x440 [btrfs]
[87.2368] Modules linked in: btrfs loop dm_thin_pool (...)
[87.2470] CPU: 1 UID: 0 PID: 638968 Comm: mount Tainted: G W 6.18.0-rc7-btrfs-next-218+ #2 PREEMPT(full)
[87.2489] Tainted: [W]=WARN
[87.2494] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[87.2514] RIP: 0010:__btrfs_unlink_inode+0x416/0x440 [btrfs]
[87.2538] Code: c0 89 04 24 (...)
[87.2568] RSP: 0018:ffffc0e741f4b9b8 EFLAGS: 00010286
[87.2574] RAX: 0000000000000000 RBX: ffff9d3ec8a6cf60 RCX: 0000000000000000
[87.2582] RDX: 0000000000000002 RSI: ffffffff84ab45a1 RDI: 00000000ffffffff
[87.2591] RBP: ffff9d3ec8a6ef20 R08: 0000000000000000 R09: ffffc0e741f4b840
[87.2599] R10: ffff9d45dc1fffa8 R11: 0000000000000003 R12: ffff9d3ee26d77e0
[87.2608] R13: ffffc0e741f4ba98 R14: ffff9d4458040800 R15: ffff9d44b6b7ca10
[87.2618] FS: 00007f7b9603a840(0000) GS:ffff9d4658982000(0000) knlGS:0000000000000000
[87.
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
can: j1939: make j1939_session_activate() fail if device is no longer registered
syzbot is still reporting
unregister_netdevice: waiting for vcan0 to become free. Usage count = 2
even after commit 93a27b5891b8 ("can: j1939: add missing calls in
NETDEV_UNREGISTER notification handler") was added. A debug printk() patch
found that j1939_session_activate() can succeed even after
j1939_cancel_active_session() from j1939_netdev_notify(NETDEV_UNREGISTER)
has completed.
Since j1939_cancel_active_session() is processed with the session list lock
held, checking ndev->reg_state in j1939_session_activate() with the session
list lock held can reliably close the race window. |
| In the Linux kernel, the following vulnerability has been resolved:
counter: interrupt-cnt: Drop IRQF_NO_THREAD flag
An IRQ handler can either be IRQF_NO_THREAD or acquire spinlock_t, as
CONFIG_PROVE_RAW_LOCK_NESTING warns:
=============================
[ BUG: Invalid wait context ]
6.18.0-rc1+git... #1
-----------------------------
some-user-space-process/1251 is trying to lock:
(&counter->events_list_lock){....}-{3:3}, at: counter_push_event [counter]
other info that might help us debug this:
context-{2:2}
no locks held by some-user-space-process/....
stack backtrace:
CPU: 0 UID: 0 PID: 1251 Comm: some-user-space-process 6.18.0-rc1+git... #1 PREEMPT
Call trace:
show_stack (C)
dump_stack_lvl
dump_stack
__lock_acquire
lock_acquire
_raw_spin_lock_irqsave
counter_push_event [counter]
interrupt_cnt_isr [interrupt_cnt]
__handle_irq_event_percpu
handle_irq_event
handle_simple_irq
handle_irq_desc
generic_handle_domain_irq
gpio_irq_handler
handle_irq_desc
generic_handle_domain_irq
gic_handle_irq
call_on_irq_stack
do_interrupt_handler
el0_interrupt
__el0_irq_handler_common
el0t_64_irq_handler
el0t_64_irq
... and Sebastian correctly points out. Remove IRQF_NO_THREAD as an
alternative to switching to raw_spinlock_t, because the latter would limit
all potential nested locks to raw_spinlock_t only. |
| The Ajax Load More – Infinite Scroll, Load More, & Lazy Load plugin for WordPress is vulnerable to unauthorized access of data due to incorrect authorization on the parse_custom_args() function in all versions up to, and including, 7.8.1. This makes it possible for unauthenticated attackers to expose the titles and excerpts of private, draft, pending, scheduled, and trashed posts. |
| The Sell BTC - Cryptocurrency Selling Calculator plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the 'orderform_data' AJAX action in all versions up to, and including, 1.5 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in order records that will execute whenever an administrator accesses the Orders page in the admin dashboard. The vulnerability was partially patched in version 1.5. |
| QWE DL 2.0.1 mobile web application contains a persistent input validation vulnerability allowing remote attackers to inject malicious script code through path parameter manipulation. Attackers can exploit the vulnerability to execute persistent cross-site scripting attacks, potentially leading to session hijacking and application module manipulation. |
| Banco Guayaquil 8.0.0 mobile iOS application contains a persistent cross-site scripting vulnerability in the TextBox Name Profile input. Attackers can inject malicious script code through a POST request that executes on application review without user interaction. |
| WiFi File Transfer 1.0.8 contains a persistent cross-site scripting vulnerability that allows remote attackers to inject malicious script codes through file and folder names. Attackers can exploit the web server's input validation weakness to execute arbitrary JavaScript when users preview infected file paths, potentially compromising user browser sessions. |
| Webile 1.0.1 contains a directory traversal vulnerability that allows remote attackers to manipulate file system paths without authentication. Attackers can exploit path manipulation to access sensitive system directories and potentially compromise the mobile device's local file system. |
| Stripe Green Downloads Wordpress Plugin 2.03 contains a persistent cross-site scripting vulnerability allowing remote attackers to inject malicious scripts in button label fields. Attackers can exploit input parameters to execute arbitrary scripts, potentially leading to session hijacking and application module manipulation. |
| Online-Exam-System 2015 contains a SQL injection vulnerability in the feedback module that allows attackers to manipulate database queries through the 'fid' parameter. Attackers can inject malicious SQL code into the 'fid' parameter to potentially extract, modify, or delete database information. |
| Crystal Shard http-protection 0.2.0 contains an IP spoofing vulnerability that allows attackers to bypass protection middleware by manipulating request headers. Attackers can hardcode consistent IP values across X-Forwarded-For, X-Client-IP, and X-Real-IP headers to circumvent security checks and gain unauthorized access. |
| Navigate CMS 2.8.7 contains an authenticated SQL injection vulnerability that allows attackers to leak database information by manipulating the 'sidx' parameter in comments. Attackers can exploit the vulnerability to extract user activation keys by using time-based blind SQL injection techniques, potentially enabling password reset for administrative accounts. |
| AirControl 1.4.2 contains a pre-authentication remote code execution vulnerability that allows unauthenticated attackers to execute arbitrary system commands through malicious Java expression injection. Attackers can exploit the /.seam endpoint by crafting a specially constructed URL with embedded Java expressions to run commands with the application's system privileges. |
| Online-Exam-System 2015 contains a time-based blind SQL injection vulnerability in the feedback form that allows attackers to extract database password hashes. Attackers can exploit the 'feed.php' endpoint by crafting malicious payload requests that use time delays to systematically enumerate user password characters. |
| Quick Player 1.3 contains a buffer overflow vulnerability that allows attackers to execute arbitrary code by crafting a malicious .m3l file with carefully constructed payload. Attackers can trigger the vulnerability by loading a specially crafted file through the application's file loading mechanism, potentially enabling remote code execution. |
| 10-Strike Bandwidth Monitor 3.9 contains a buffer overflow vulnerability that allows attackers to bypass SafeSEH, ASLR, and DEP protections through carefully crafted input. Attackers can exploit the vulnerability by sending a malicious payload to the application's registration key input, enabling remote code execution and launching arbitrary system commands. |
| Frigate Professional 3.36.0.9 contains a local buffer overflow vulnerability in the 'Find Computer' feature that allows attackers to execute arbitrary code by overflowing the computer name input field. Attackers can craft a malicious payload that triggers a buffer overflow, enabling code execution and launching calculator as a proof of concept. |
| Frigate 2.02 contains a denial of service vulnerability that allows attackers to crash the application by sending oversized input to the command line interface. Attackers can generate a payload of 8000 repeated characters and paste it into the application's command line field to trigger an application crash. |
