| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In ImageMagick 7.0.8-36 Q16, there is a heap-based buffer over-read in the function WriteTIFFImage of coders/tiff.c, which allows an attacker to cause a denial of service or information disclosure via a crafted image file. |
| The Linux kernel 4.x (starting from 4.1) and 5.x before 5.0.8 allows Information Exposure (partial kernel address disclosure), leading to a KASLR bypass. Specifically, it is possible to extract the KASLR kernel image offset using the IP ID values the kernel produces for connection-less protocols (e.g., UDP and ICMP). When such traffic is sent to multiple destination IP addresses, it is possible to obtain hash collisions (of indices to the counter array) and thereby obtain the hashing key (via enumeration). This key contains enough bits from a kernel address (of a static variable) so when the key is extracted (via enumeration), the offset of the kernel image is exposed. This attack can be carried out remotely, by the attacker forcing the target device to send UDP or ICMP (or certain other) traffic to attacker-controlled IP addresses. Forcing a server to send UDP traffic is trivial if the server is a DNS server. ICMP traffic is trivial if the server answers ICMP Echo requests (ping). For client targets, if the target visits the attacker's web page, then WebRTC or gQUIC can be used to force UDP traffic to attacker-controlled IP addresses. NOTE: this attack against KASLR became viable in 4.1 because IP ID generation was changed to have a dependency on an address associated with a network namespace. |
| In the Linux kernel before 5.1.7, a device can be tracked by an attacker using the IP ID values the kernel produces for connection-less protocols (e.g., UDP and ICMP). When such traffic is sent to multiple destination IP addresses, it is possible to obtain hash collisions (of indices to the counter array) and thereby obtain the hashing key (via enumeration). An attack may be conducted by hosting a crafted web page that uses WebRTC or gQUIC to force UDP traffic to attacker-controlled IP addresses. |
| Payload size is not validated before reading memory that may cause issue of accessing invalid pointer or some garbage data in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables, Snapdragon Wired Infrastructure and Networking in APQ8009, APQ8017, APQ8053, APQ8096AU, APQ8098, IPQ4019, IPQ6018, IPQ8064, IPQ8074, MDM9206, MDM9207C, MDM9607, MDM9640, MDM9650, MSM8909W, MSM8996AU, QCS405, QCS605, Rennell, Saipan, SC8180X, SDA660, SDA845, SDM429W, SDM439, SDM670, SDM710, SDX20, SDX24, SDX55, SM8150, SM8250, SXR1130, SXR2130 |
| Possible buffer overwrite in message handler due to lack of validation of tid value calculated from packets received from firmware in Snapdragon Auto, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables, Snapdragon Wired Infrastructure and Networking in APQ8009, APQ8053, APQ8064, APQ8096AU, IPQ4019, IPQ8064, MDM9206, MDM9207C, MDM9607, MDM9615, MDM9640, MDM9650, MSM8909, MSM8909W, MSM8939, MSM8996AU, QCA4531, QCA6174A, QCA6574AU, QCA9377, QCA9379, QCA9558, QCA9880, QCA9886, QCA9980, SDA660, SDM630, SDM636, SDM660, SDX20, SDX24 |
| Improper input validation while processing SIP URI received from the network will lead to buffer over-read and then to denial of service in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in APQ8009, APQ8017, APQ8053, APQ8096, APQ8096AU, APQ8098, MDM9150, MDM9205, MDM9206, MDM9607, MDM9615, MDM9625, MDM9635M, MDM9640, MDM9645, MDM9650, MDM9655, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8996AU, MSM8998, Nicobar, QCM2150, QCS605, QM215, Rennell, Saipan, SC8180X, SDA660, SDA845, SDM429, SDM429W, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX20, SDX24, SDX55, SM6150, SM7150, SM8150, SM8250, SXR1130, SXR2130 |
| Buffer over-read can occur in fast message handler due to improper input validation while processing a message from firmware in Snapdragon Auto, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music in APQ8053, APQ8096AU, MSM8996AU, MSM8998, QCN7605, QCS405, QCS605, SDA660, SDM636, SDM660, SDX20, SDX24 |
| Multiple Buffer Over-read issue can happen due to improper length checks while decoding Service Reject/RAU Reject/PTMSI Realloc cmd in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables, Snapdragon Wired Infrastructure and Networking in APQ8009, APQ8017, APQ8053, APQ8096, APQ8096AU, APQ8098, MDM9150, MDM9205, MDM9206, MDM9607, MDM9615, MDM9625, MDM9635M, MDM9640, MDM9645, MDM9650, MDM9655, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8939, MSM8940, MSM8953, MSM8996AU, MSM8998, Nicobar, QCM2150, QCS605, QM215, Rennell, SC8180X, SDA660, SDA845, SDM429, SDM429W, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX20, SDX24, SDX55, SM6150, SM7150, SM8150, SXR1130 |
| Lack of check of address range received from firmware response allows modem to respond arbitrary pages into its address range which can compromise HLOS in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in MSM8909W, MSM8996AU, QCS405, QCS605, Qualcomm 215, SD 425, SD 439 / SD 429, SD 450, SD 625, SD 632, SD 636, SD 665, SD 675, SD 712 / SD 710 / SD 670, SD 730, SD 820A, SD 845 / SD 850, SD 855, SDA660, SDM439, SDM660, SDX20, SDX24 |
| Improper validation for loop variable received from firmware can lead to out of bound access in WLAN function while iterating through loop in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music in APQ8053, APQ8096AU, APQ8098, MDM9640, MSM8996AU, MSM8998, QCA6574AU, QCN7605, QCS405, QCS605, SDA845, SDM845, SDX20 |
| Target specific data is being sent to remote server and leads to information exposure in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Wearables in APQ8009, APQ8053, APQ8096AU, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8996AU, QCA6574AU, QCS605, Rennell, SDA660, SDM429W, SDM439, SDM450, SDM710, SDM845, SM7150, SM8150, SM8250, SXR2130 |
| While processing QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY vendor command, driver does not validate the data obtained from the user space which could be invalid and thus leads to an undesired behaviour in Snapdragon Auto, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile in MDM9206, MDM9607, MSM8996AU, QCA6174A, QCA6574AU, QCA9377, QCA9379, QCS605, SD 600, SD 625, SD 636, SD 665, SD 675, SD 712 / SD 710 / SD 670, SD 730, SD 820, SD 820A, SD 835, SD 845 / SD 850, SD 855, SDM630, SDM660, SDX24 |
| Possible use after free issue due to improper input validation in volume listener library in Snapdragon Auto, Snapdragon Compute, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables in MDM9150, MDM9206, MDM9607, MDM9650, MSM8909W, MSM8996AU, QCS405, QCS605, Qualcomm 215, SD 210/SD 212/SD 205, SD 425, SD 427, SD 430, SD 435, SD 439 / SD 429, SD 450, SD 625, SD 632, SD 636, SD 665, SD 675, SD 712 / SD 710 / SD 670, SD 730, SD 820, SD 820A, SD 835, SD 845 / SD 850, SD 855, SDA660, SDM439, SDM630, SDM660, SDX20, SDX24 |
| Side channel issue in QTEE due to usage of non-time-constant comparison function such as memcmp or strcmp in Snapdragon Auto, Snapdragon Compute, Snapdragon Connectivity, Snapdragon Consumer Electronics Connectivity, Snapdragon Consumer IOT, Snapdragon Industrial IOT, Snapdragon IoT, Snapdragon Mobile, Snapdragon Voice & Music, Snapdragon Wearables, Snapdragon Wired Infrastructure and Networking in APQ8009, APQ8016, APQ8017, APQ8053, APQ8076, APQ8096, APQ8096AU, APQ8098, IPQ8074, MDM9150, MDM9205, MDM9206, MDM9207C, MDM9607, MDM9640, MDM9650, MDM9655, MSM8905, MSM8909, MSM8909W, MSM8917, MSM8920, MSM8937, MSM8940, MSM8953, MSM8996, MSM8996AU, MSM8998, QCA8081, QCS404, QCS605, QM215, SDA660, SDA845, SDM429, SDM439, SDM450, SDM630, SDM632, SDM636, SDM660, SDM670, SDM710, SDM845, SDM850, SDX20, SDX55, SM6150, SM7150, SM8150, SXR1130, SXR2130 |
| A sandbox bypass vulnerability in Jenkins Script Security Plugin 1.64 and earlier related to the handling of default parameter expressions in constructors allowed attackers to execute arbitrary code in sandboxed scripts. |
| Jenkins Project Inheritance Plugin 2.0.0 and earlier displayed a list of environment variables passed to a build without masking sensitive variables contributed by the Mask Passwords Plugin. |
| Jenkins 2.196 and earlier, LTS 2.176.3 and earlier printed the value of the "Cookie" HTTP request header on the /whoAmI/ URL, allowing attackers exploiting another XSS vulnerability to obtain the HTTP session cookie despite it being marked HttpOnly. |
| A sandbox bypass vulnerability in Jenkins Script Security Plugin 1.61 and earlier related to the handling of method pointer expressions allowed attackers to execute arbitrary code in sandboxed scripts. |
| A vulnerability in the Stapler web framework used in Jenkins 2.185 and earlier, LTS 2.176.1 and earlier allowed attackers to access view fragments directly, bypassing permission checks and possibly obtain sensitive information. |
| In Eclipse Jetty version 7.x, 8.x, 9.2.27 and older, 9.3.26 and older, and 9.4.16 and older, the server running on any OS and Jetty version combination will reveal the configured fully qualified directory base resource location on the output of the 404 error for not finding a Context that matches the requested path. The default server behavior on jetty-distribution and jetty-home will include at the end of the Handler tree a DefaultHandler, which is responsible for reporting this 404 error, it presents the various configured contexts as HTML for users to click through to. This produced HTML includes output that contains the configured fully qualified directory base resource location for each context. |
