| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| The ESP32 system on a chip (SoC) that powers the Meatmeet Pro was found to have JTAG enabled. By leaving JTAG enabled on an ESP32 in a commercial product an attacker with physical access to the device can connect over this port and reflash the device's firmware with malicious code which will be executed upon running. As a result, the victim will lose access to the functionality of their device and the attack may gain unauthorized access to the victim's Wi-Fi network by re-connecting to the SSID defined in the NVS partition of the device. |
| As UART download mode is still enabled on the ESP32 chip on which the firmware runs, an adversary can dump the flash from the device and retrieve sensitive information such as details about the current and previous Wi-Fi network from the NVS partition. Additionally, this allows the adversary to reflash the device with their own firmware which may contain malicious modifications. |
| A security vulnerability has been detected in UTT 进取 520W 1.7.7-180627. Impacted is the function strcpy of the file /goform/formConfigDnsFilterGlobal. Such manipulation of the argument timeRangeName leads to buffer overflow. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was detected in UTT 进取 520W 1.7.7-180627. The affected element is the function strcpy of the file /goform/websHostFilter. Performing manipulation of the argument addHostFilter results in buffer overflow. The attack is possible to be carried out remotely. The exploit is now public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| JIT miscompilation in the JavaScript Engine: JIT component. This vulnerability affects Firefox < 146, Firefox ESR < 140.6, Thunderbird < 146, and Thunderbird < 140.6. |
| A flaw has been found in UTT 进取 520W 1.7.7-180627. The impacted element is the function strcpy of the file /goform/formArpBindConfig. Executing manipulation of the argument pools can lead to buffer overflow. The attack may be performed from remote. The exploit has been published and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was found in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. Affected by this vulnerability is the function AP_get_wireless_clientlist_setClientsName of the file mod_form.so. Performing manipulation of the argument clientsname_0 results in stack-based buffer overflow. The attack can be initiated remotely. The exploit has been made public and could be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was determined in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. Affected by this issue is the function RE2000v2Repeater_get_wireless_clientlist_setClientsName of the file mod_form.so. Executing manipulation of the argument clientsname_0 can lead to stack-based buffer overflow. The attack can be launched remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This affects the function AP_get_wired_clientlist_setClientsName of the file mod_form.so. The manipulation of the argument clientsname_0 leads to stack-based buffer overflow. The attack may be initiated remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security flaw has been discovered in Linksys RE6500, RE6250, RE6300, RE6350, RE7000 and RE9000 1.0.013.001/1.0.04.001/1.0.04.002/1.1.05.003/1.2.07.001. This vulnerability affects the function RE2000v2Repeater_get_wired_clientlist_setClientsName of the file mod_form.so. The manipulation of the argument clientsname_0 results in stack-based buffer overflow. The attack may be launched remotely. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way. |
| Flexsense DiskBoss 7.7.14 contains a local buffer overflow vulnerability in the 'Reports and Data Directory' field that allows an attacker to execute arbitrary code on the system. |
| Flexsense DiskBoss 7.7.14 contains a local buffer overflow vulnerability in the 'Input Directory' component that allows unauthenticated attackers to execute arbitrary code on the system. Attackers can exploit this by pasting a specially crafted directory path into the 'Add Input Directory' field. |
| Windows Fax Service Remote Code Execution Vulnerability |
| A weakness has been identified in H3C Magic B1 up to 100R004. The affected element is the function sub_44de0 of the file /goform/aspForm. This manipulation of the argument param causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way. |
| A weakness has been identified in UGREEN DH2100+ up to 5.3.0.251125. This affects the function handler_file_backup_create of the file /v1/file/backup/create of the component nas_svr. Executing manipulation of the argument path can lead to buffer overflow. The attack can be executed remotely. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way. |
| LightFTP version 1.1 is vulnerable to a buffer overflow in the "writelogentry" function resulting a denial of services or a remote code execution. |
| A weakness has been identified in D-Link DWR-M920, DWR-M921, DWR-M960, DIR-822K and DIR-825M 1.01.07. This issue affects some unknown processing of the file /boafrm/formTracerouteDiagnosticRun. Executing manipulation of the argument host can lead to buffer overflow. The attack may be launched remotely. The exploit has been made available to the public and could be exploited. |
| A security flaw has been discovered in D-Link DWR-M920, DWR-M921, DWR-M960, DWR-M961 and DIR-825M 1.01.07/1.1.47. This vulnerability affects unknown code of the file /boafrm/formPingDiagnosticRun. Performing manipulation of the argument host results in buffer overflow. The attack may be initiated remotely. The exploit has been released to the public and may be exploited. |
| An issue was discovered in Samsung Mobile Processor, Wearable Processor, and Modem Exynos 980, 990, 850, 2100, 1280, 2200, 1330, 1380, 1480, 2400, 1580, 2500, W920, W930, W1000, Modem 5123, Modem 5300, and Modem 5400. The function used to decode the SOR transparent container lacks bounds checking, which can cause a fatal error. |
| A crafted NTFS image can cause a heap-based buffer overflow in ntfs_compressed_pwrite in NTFS-3G < 2021.8.22. |
