| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| BigBlueButton is an open-source virtual classroom. In versions 3.0.21 and below, the official documentation for "Server Customization" on Support for ClamAV as presentation file scanner contains instructions that leave a BBB server vulnerable for Denial of Service. The flawed command exposes both ports (3310 and 7357) to the internet. A remote attacker can use this to send complex or large documents to clamd and waste server resources, or shutdown the clamd process. The clamd documentation explicitly warns about exposing this port. Enabling ufw (ubuntu firewall) during install does not help, because Docker routes container traffic through the nat table, which is not managed or restricted by ufw. Rules installed by ufw in the filter table have no effect on docker traffic. In addition, the provided example also mounts /var/bigbluebutton with write permissions into the container, which should not be required. Future vulnerabilities in clamd may allow attackers to manipulate files in that folder. Users are unaffected unless they have opted in to follow the extra instructions from BigBlueButton's documentation. This issue has been fixed in version 3.0.22. |
| BigBlueButton is an open-source virtual classroom. In versions 3.0.19 and below, when first joining a session with the microphone muted, the client sends audio to the server regardless of mute state. Media is discarded at the server side, so it isn't audible to any participants, but this may allow for malicious server operators to access audio data. The behavior is only incorrect between joining the meeting and the first time the user unmutes. This issue has been fixed in version 3.0.20. |
| In the Linux kernel, the following vulnerability has been resolved:
arp: do not assume dev_hard_header() does not change skb->head
arp_create() is the only dev_hard_header() caller
making assumption about skb->head being unchanged.
A recent commit broke this assumption.
Initialize @arp pointer after dev_hard_header() call. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: check that server is running in unlock_filesystem
If we are trying to unlock the filesystem via an administrative
interface and nfsd isn't running, it crashes the server. This
happens currently because nfsd4_revoke_states() access state
structures (eg., conf_id_hashtbl) that has been freed as a part
of the server shutdown.
[ 59.465072] Call trace:
[ 59.465308] nfsd4_revoke_states+0x1b4/0x898 [nfsd] (P)
[ 59.465830] write_unlock_fs+0x258/0x440 [nfsd]
[ 59.466278] nfsctl_transaction_write+0xb0/0x120 [nfsd]
[ 59.466780] vfs_write+0x1f0/0x938
[ 59.467088] ksys_write+0xfc/0x1f8
[ 59.467395] __arm64_sys_write+0x74/0xb8
[ 59.467746] invoke_syscall.constprop.0+0xdc/0x1e8
[ 59.468177] do_el0_svc+0x154/0x1d8
[ 59.468489] el0_svc+0x40/0xe0
[ 59.468767] el0t_64_sync_handler+0xa0/0xe8
[ 59.469138] el0t_64_sync+0x1ac/0x1b0
Ensure this can't happen by taking the nfsd_mutex and checking that
the server is still up, and then holding the mutex across the call to
nfsd4_revoke_states(). |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: make free_choose_arg_map() resilient to partial allocation
free_choose_arg_map() may dereference a NULL pointer if its caller fails
after a partial allocation.
For example, in decode_choose_args(), if allocation of arg_map->args
fails, execution jumps to the fail label and free_choose_arg_map() is
called. Since arg_map->size is updated to a non-zero value before memory
allocation, free_choose_arg_map() will iterate over arg_map->args and
dereference a NULL pointer.
To prevent this potential NULL pointer dereference and make
free_choose_arg_map() more resilient, add checks for pointers before
iterating. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: fix racy bitfield write in btrfs_clear_space_info_full()
From the memory-barriers.txt document regarding memory barrier ordering
guarantees:
(*) These guarantees do not apply to bitfields, because compilers often
generate code to modify these using non-atomic read-modify-write
sequences. Do not attempt to use bitfields to synchronize parallel
algorithms.
(*) Even in cases where bitfields are protected by locks, all fields
in a given bitfield must be protected by one lock. If two fields
in a given bitfield are protected by different locks, the compiler's
non-atomic read-modify-write sequences can cause an update to one
field to corrupt the value of an adjacent field.
btrfs_space_info has a bitfield sharing an underlying word consisting of
the fields full, chunk_alloc, and flush:
struct btrfs_space_info {
struct btrfs_fs_info * fs_info; /* 0 8 */
struct btrfs_space_info * parent; /* 8 8 */
...
int clamp; /* 172 4 */
unsigned int full:1; /* 176: 0 4 */
unsigned int chunk_alloc:1; /* 176: 1 4 */
unsigned int flush:1; /* 176: 2 4 */
...
Therefore, to be safe from parallel read-modify-writes losing a write to
one of the bitfield members protected by a lock, all writes to all the
bitfields must use the lock. They almost universally do, except for
btrfs_clear_space_info_full() which iterates over the space_infos and
writes out found->full = 0 without a lock.
Imagine that we have one thread completing a transaction in which we
finished deleting a block_group and are thus calling
btrfs_clear_space_info_full() while simultaneously the data reclaim
ticket infrastructure is running do_async_reclaim_data_space():
T1 T2
btrfs_commit_transaction
btrfs_clear_space_info_full
data_sinfo->full = 0
READ: full:0, chunk_alloc:0, flush:1
do_async_reclaim_data_space(data_sinfo)
spin_lock(&space_info->lock);
if(list_empty(tickets))
space_info->flush = 0;
READ: full: 0, chunk_alloc:0, flush:1
MOD/WRITE: full: 0, chunk_alloc:0, flush:0
spin_unlock(&space_info->lock);
return;
MOD/WRITE: full:0, chunk_alloc:0, flush:1
and now data_sinfo->flush is 1 but the reclaim worker has exited. This
breaks the invariant that flush is 0 iff there is no work queued or
running. Once this invariant is violated, future allocations that go
into __reserve_bytes() will add tickets to space_info->tickets but will
see space_info->flush is set to 1 and not queue the work. After this,
they will block forever on the resulting ticket, as it is now impossible
to kick the worker again.
I also confirmed by looking at the assembly of the affected kernel that
it is doing RMW operations. For example, to set the flush (3rd) bit to 0,
the assembly is:
andb $0xfb,0x60(%rbx)
and similarly for setting the full (1st) bit to 0:
andb $0xfe,-0x20(%rax)
So I think this is really a bug on practical systems. I have observed
a number of systems in this exact state, but am currently unable to
reproduce it.
Rather than leaving this footgun lying around for the future, take
advantage of the fact that there is room in the struct anyway, and that
it is already quite large and simply change the three bitfield members to
bools. This avoids writes to space_info->full having any effect on
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: act_api: avoid dereferencing ERR_PTR in tcf_idrinfo_destroy
syzbot reported a crash in tc_act_in_hw() during netns teardown where
tcf_idrinfo_destroy() passed an ERR_PTR(-EBUSY) value as a tc_action
pointer, leading to an invalid dereference.
Guard against ERR_PTR entries when iterating the action IDR so teardown
does not call tc_act_in_hw() on an error pointer. |
| In the Linux kernel, the following vulnerability has been resolved:
gpiolib: fix race condition for gdev->srcu
If two drivers were calling gpiochip_add_data_with_key(), one may be
traversing the srcu-protected list in gpio_name_to_desc(), meanwhile
other has just added its gdev in gpiodev_add_to_list_unlocked().
This creates a non-mutexed and non-protected timeframe, when one
instance is dereferencing and using &gdev->srcu, before the other
has initialized it, resulting in crash:
[ 4.935481] Unable to handle kernel paging request at virtual address ffff800272bcc000
[ 4.943396] Mem abort info:
[ 4.943400] ESR = 0x0000000096000005
[ 4.943403] EC = 0x25: DABT (current EL), IL = 32 bits
[ 4.943407] SET = 0, FnV = 0
[ 4.943410] EA = 0, S1PTW = 0
[ 4.943413] FSC = 0x05: level 1 translation fault
[ 4.943416] Data abort info:
[ 4.943418] ISV = 0, ISS = 0x00000005, ISS2 = 0x00000000
[ 4.946220] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 4.955261] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 4.955268] swapper pgtable: 4k pages, 48-bit VAs, pgdp=0000000038e6c000
[ 4.961449] [ffff800272bcc000] pgd=0000000000000000
[ 4.969203] , p4d=1000000039739003
[ 4.979730] , pud=0000000000000000
[ 4.980210] phandle (CPU): 0x0000005e, phandle (BE): 0x5e000000 for node "reset"
[ 4.991736] Internal error: Oops: 0000000096000005 [#1] PREEMPT SMP
...
[ 5.121359] pc : __srcu_read_lock+0x44/0x98
[ 5.131091] lr : gpio_name_to_desc+0x60/0x1a0
[ 5.153671] sp : ffff8000833bb430
[ 5.298440]
[ 5.298443] Call trace:
[ 5.298445] __srcu_read_lock+0x44/0x98
[ 5.309484] gpio_name_to_desc+0x60/0x1a0
[ 5.320692] gpiochip_add_data_with_key+0x488/0xf00
5.946419] ---[ end trace 0000000000000000 ]---
Move initialization code for gdev fields before it is added to
gpio_devices, with adjacent initialization code.
Adjust goto statements to reflect modified order of operations
[Bartosz: fixed a build issue, removed stray newline] |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: Fix RSS LUT NULL pointer crash on early ethtool operations
The RSS LUT is not initialized until the interface comes up, causing
the following NULL pointer crash when ethtool operations like rxhash on/off
are performed before the interface is brought up for the first time.
Move RSS LUT initialization from ndo_open to vport creation to ensure LUT
is always available. This enables RSS configuration via ethtool before
bringing the interface up. Simplify LUT management by maintaining all
changes in the driver's soft copy and programming zeros to the indirection
table when rxhash is disabled. Defer HW programming until the interface
comes up if it is down during rxhash and LUT configuration changes.
Steps to reproduce:
** Load idpf driver; interfaces will be created
modprobe idpf
** Before bringing the interfaces up, turn rxhash off
ethtool -K eth2 rxhash off
[89408.371875] BUG: kernel NULL pointer dereference, address: 0000000000000000
[89408.371908] #PF: supervisor read access in kernel mode
[89408.371924] #PF: error_code(0x0000) - not-present page
[89408.371940] PGD 0 P4D 0
[89408.371953] Oops: Oops: 0000 [#1] SMP NOPTI
<snip>
[89408.372052] RIP: 0010:memcpy_orig+0x16/0x130
[89408.372310] Call Trace:
[89408.372317] <TASK>
[89408.372326] ? idpf_set_features+0xfc/0x180 [idpf]
[89408.372363] __netdev_update_features+0x295/0xde0
[89408.372384] ethnl_set_features+0x15e/0x460
[89408.372406] genl_family_rcv_msg_doit+0x11f/0x180
[89408.372429] genl_rcv_msg+0x1ad/0x2b0
[89408.372446] ? __pfx_ethnl_set_features+0x10/0x10
[89408.372465] ? __pfx_genl_rcv_msg+0x10/0x10
[89408.372482] netlink_rcv_skb+0x58/0x100
[89408.372502] genl_rcv+0x2c/0x50
[89408.372516] netlink_unicast+0x289/0x3e0
[89408.372533] netlink_sendmsg+0x215/0x440
[89408.372551] __sys_sendto+0x234/0x240
[89408.372571] __x64_sys_sendto+0x28/0x30
[89408.372585] x64_sys_call+0x1909/0x1da0
[89408.372604] do_syscall_64+0x7a/0xfa0
[89408.373140] ? clear_bhb_loop+0x60/0xb0
[89408.373647] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[89408.378887] </TASK>
<snip> |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: prevent potential out-of-bounds reads in handle_auth_done()
Perform an explicit bounds check on payload_len to avoid a possible
out-of-bounds access in the callout.
[ idryomov: changelog ] |
| In the Linux kernel, the following vulnerability has been resolved:
driver core: fix potential null-ptr-deref in device_add()
I got the following null-ptr-deref report while doing fault injection test:
BUG: kernel NULL pointer dereference, address: 0000000000000058
CPU: 2 PID: 278 Comm: 37-i2c-ds2482 Tainted: G B W N 6.1.0-rc3+
RIP: 0010:klist_put+0x2d/0xd0
Call Trace:
<TASK>
klist_remove+0xf1/0x1c0
device_release_driver_internal+0x196/0x210
bus_remove_device+0x1bd/0x240
device_add+0xd3d/0x1100
w1_add_master_device+0x476/0x490 [wire]
ds2482_probe+0x303/0x3e0 [ds2482]
This is how it happened:
w1_alloc_dev()
// The dev->driver is set to w1_master_driver.
memcpy(&dev->dev, device, sizeof(struct device));
device_add()
bus_add_device()
dpm_sysfs_add() // It fails, calls bus_remove_device.
// error path
bus_remove_device()
// The dev->driver is not null, but driver is not bound.
__device_release_driver()
klist_remove(&dev->p->knode_driver) <-- It causes null-ptr-deref.
// normal path
bus_probe_device() // It's not called yet.
device_bind_driver()
If dev->driver is set, in the error path after calling bus_add_device()
in device_add(), bus_remove_device() is called, then the device will be
detached from driver. But device_bind_driver() is not called yet, so it
causes null-ptr-deref while access the 'knode_driver'. To fix this, set
dev->driver to null in the error path before calling bus_remove_device(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: do not write to msg_get_inq in callee
NULL pointer dereference fix.
msg_get_inq is an input field from caller to callee. Don't set it in
the callee, as the caller may not clear it on struct reuse.
This is a kernel-internal variant of msghdr only, and the only user
does reinitialize the field. So this is not critical for that reason.
But it is more robust to avoid the write, and slightly simpler code.
And it fixes a bug, see below.
Callers set msg_get_inq to request the input queue length to be
returned in msg_inq. This is equivalent to but independent from the
SO_INQ request to return that same info as a cmsg (tp->recvmsg_inq).
To reduce branching in the hot path the second also sets the msg_inq.
That is WAI.
This is a fix to commit 4d1442979e4a ("af_unix: don't post cmsg for
SO_INQ unless explicitly asked for"), which fixed the inverse.
Also avoid NULL pointer dereference in unix_stream_read_generic if
state->msg is NULL and msg->msg_get_inq is written. A NULL state->msg
can happen when splicing as of commit 2b514574f7e8 ("net: af_unix:
implement splice for stream af_unix sockets").
Also collapse two branches using a bitwise or. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mscc: ocelot: Fix crash when adding interface under a lag
Commit 15faa1f67ab4 ("lan966x: Fix crash when adding interface under a lag")
fixed a similar issue in the lan966x driver caused by a NULL pointer dereference.
The ocelot_set_aggr_pgids() function in the ocelot driver has similar logic
and is susceptible to the same crash.
This issue specifically affects the ocelot_vsc7514.c frontend, which leaves
unused ports as NULL pointers. The felix_vsc9959.c frontend is unaffected as
it uses the DSA framework which registers all ports.
Fix this by checking if the port pointer is valid before accessing it. |
| In the Linux kernel, the following vulnerability has been resolved:
idpf: detach and close netdevs while handling a reset
Protect the reset path from callbacks by setting the netdevs to detached
state and close any netdevs in UP state until the reset handling has
completed. During a reset, the driver will de-allocate resources for the
vport, and there is no guarantee that those will recover, which is why the
existing vport_ctrl_lock does not provide sufficient protection.
idpf_detach_and_close() is called right before reset handling. If the
reset handling succeeds, the netdevs state is recovered via call to
idpf_attach_and_open(). If the reset handling fails the netdevs remain
down. The detach/down calls are protected with RTNL lock to avoid racing
with callbacks. On the recovery side the attach can be done without
holding the RTNL lock as there are no callbacks expected at that point,
due to detach/close always being done first in that flow.
The previous logic restoring the netdevs state based on the
IDPF_VPORT_UP_REQUESTED flag in the init task is not needed anymore, hence
the removal of idpf_set_vport_state(). The IDPF_VPORT_UP_REQUESTED is
still being used to restore the state of the netdevs following the reset,
but has no use outside of the reset handling flow.
idpf_init_hard_reset() is converted to void, since it was used as such and
there is no error handling being done based on its return value.
Before this change, invoking hard and soft resets simultaneously will
cause the driver to lose the vport state:
ip -br a
<inf> UP
echo 1 > /sys/class/net/ens801f0/device/reset& \
ethtool -L ens801f0 combined 8
ip -br a
<inf> DOWN
ip link set <inf> up
ip -br a
<inf> DOWN
Also in case of a failure in the reset path, the netdev is left
exposed to external callbacks, while vport resources are not
initialized, leading to a crash on subsequent ifup/down:
[408471.398966] idpf 0000:83:00.0: HW reset detected
[408471.411744] idpf 0000:83:00.0: Device HW Reset initiated
[408472.277901] idpf 0000:83:00.0: The driver was unable to contact the device's firmware. Check that the FW is running. Driver state= 0x2
[408508.125551] BUG: kernel NULL pointer dereference, address: 0000000000000078
[408508.126112] #PF: supervisor read access in kernel mode
[408508.126687] #PF: error_code(0x0000) - not-present page
[408508.127256] PGD 2aae2f067 P4D 0
[408508.127824] Oops: Oops: 0000 [#1] SMP NOPTI
...
[408508.130871] RIP: 0010:idpf_stop+0x39/0x70 [idpf]
...
[408508.139193] Call Trace:
[408508.139637] <TASK>
[408508.140077] __dev_close_many+0xbb/0x260
[408508.140533] __dev_change_flags+0x1cf/0x280
[408508.140987] netif_change_flags+0x26/0x70
[408508.141434] dev_change_flags+0x3d/0xb0
[408508.141878] devinet_ioctl+0x460/0x890
[408508.142321] inet_ioctl+0x18e/0x1d0
[408508.142762] ? _copy_to_user+0x22/0x70
[408508.143207] sock_do_ioctl+0x3d/0xe0
[408508.143652] sock_ioctl+0x10e/0x330
[408508.144091] ? find_held_lock+0x2b/0x80
[408508.144537] __x64_sys_ioctl+0x96/0xe0
[408508.144979] do_syscall_64+0x79/0x3d0
[408508.145415] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[408508.145860] RIP: 0033:0x7f3e0bb4caff |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: provide locking for v4_end_grace
Writing to v4_end_grace can race with server shutdown and result in
memory being accessed after it was freed - reclaim_str_hashtbl in
particularly.
We cannot hold nfsd_mutex across the nfsd4_end_grace() call as that is
held while client_tracking_op->init() is called and that can wait for
an upcall to nfsdcltrack which can write to v4_end_grace, resulting in a
deadlock.
nfsd4_end_grace() is also called by the landromat work queue and this
doesn't require locking as server shutdown will stop the work and wait
for it before freeing anything that nfsd4_end_grace() might access.
However, we must be sure that writing to v4_end_grace doesn't restart
the work item after shutdown has already waited for it. For this we
add a new flag protected with nn->client_lock. It is set only while it
is safe to make client tracking calls, and v4_end_grace only schedules
work while the flag is set with the spinlock held.
So this patch adds a nfsd_net field "client_tracking_active" which is
set as described. Another field "grace_end_forced", is set when
v4_end_grace is written. After this is set, and providing
client_tracking_active is set, the laundromat is scheduled.
This "grace_end_forced" field bypasses other checks for whether the
grace period has finished.
This resolves a race which can result in use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: return the handler error from mon_handle_auth_done()
Currently any error from ceph_auth_handle_reply_done() is propagated
via finish_auth() but isn't returned from mon_handle_auth_done(). This
results in higher layers learning that (despite the monitor considering
us to be successfully authenticated) something went wrong in the
authentication phase and reacting accordingly, but msgr2 still trying
to proceed with establishing the session in the background. In the
case of secure mode this can trigger a WARN in setup_crypto() and later
lead to a NULL pointer dereference inside of prepare_auth_signature(). |
| Missing Authorization vulnerability in SecuPress SecuPress Free secupress.This issue affects SecuPress Free: from n/a through <= 2.2.5.3. |
| In the Linux kernel, the following vulnerability has been resolved:
iomap: Fix possible overflow condition in iomap_write_delalloc_scan
folio_next_index() returns an unsigned long value which left shifted
by PAGE_SHIFT could possibly cause an overflow on 32-bit system. Instead
use folio_pos(folio) + folio_size(folio), which does this correctly. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: uclogic: Correct devm device reference for hidinput input_dev name
Reference the HID device rather than the input device for the devm
allocation of the input_dev name. Referencing the input_dev would lead to a
use-after-free when the input_dev was unregistered and subsequently fires a
uevent that depends on the name. At the point of firing the uevent, the
name would be freed by devres management.
Use devm_kasprintf to simplify the logic for allocating memory and
formatting the input_dev name string. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Initialize allocated memory before use
KMSAN reports: Multiple uninitialized values detected:
- KMSAN: uninit-value in ntfs_read_hdr (3)
- KMSAN: uninit-value in bcmp (3)
Memory is allocated by __getname(), which is a wrapper for
kmem_cache_alloc(). This memory is used before being properly
cleared. Change kmem_cache_alloc() to kmem_cache_zalloc() to
properly allocate and clear memory before use. |
