| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: Return NULL from huge_pte_offset() for invalid PMD
LoongArch's huge_pte_offset() currently returns a pointer to a PMD slot
even if the underlying entry points to invalid_pte_table (indicating no
mapping). Callers like smaps_hugetlb_range() fetch this invalid entry
value (the address of invalid_pte_table) via this pointer.
The generic is_swap_pte() check then incorrectly identifies this address
as a swap entry on LoongArch, because it satisfies the "!pte_present()
&& !pte_none()" conditions. This misinterpretation, combined with a
coincidental match by is_migration_entry() on the address bits, leads to
kernel crashes in pfn_swap_entry_to_page().
Fix this at the architecture level by modifying huge_pte_offset() to
check the PMD entry's content using pmd_none() before returning. If the
entry is invalid (i.e., it points to invalid_pte_table), return NULL
instead of the pointer to the slot. |
| A vulnerability has been identified in Spectrum Power 4 (All versions < V4.70 SP12 Update 2). The affected application is vulnerable to extraction of database credentials via a world-readable credential file. This allows an attacker to connect to the database as privileged application user and to run system commands via the database. |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/gic-v2m: Prevent use after free of gicv2m_get_fwnode()
With ACPI in place, gicv2m_get_fwnode() is registered with the pci
subsystem as pci_msi_get_fwnode_cb(), which may get invoked at runtime
during a PCI host bridge probe. But, the call back is wrongly marked as
__init, causing it to be freed, while being registered with the PCI
subsystem and could trigger:
Unable to handle kernel paging request at virtual address ffff8000816c0400
gicv2m_get_fwnode+0x0/0x58 (P)
pci_set_bus_msi_domain+0x74/0x88
pci_register_host_bridge+0x194/0x548
This is easily reproducible on a Juno board with ACPI boot.
Retain the function for later use. |
| In the Linux kernel, the following vulnerability has been resolved:
xen-netfront: handle NULL returned by xdp_convert_buff_to_frame()
The function xdp_convert_buff_to_frame() may return NULL if it fails
to correctly convert the XDP buffer into an XDP frame due to memory
constraints, internal errors, or invalid data. Failing to check for NULL
may lead to a NULL pointer dereference if the result is used later in
processing, potentially causing crashes, data corruption, or undefined
behavior.
On XDP redirect failure, the associated page must be released explicitly
if it was previously retained via get_page(). Failing to do so may result
in a memory leak, as the pages reference count is not decremented. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/eevdf: Fix se->slice being set to U64_MAX and resulting crash
There is a code path in dequeue_entities() that can set the slice of a
sched_entity to U64_MAX, which sometimes results in a crash.
The offending case is when dequeue_entities() is called to dequeue a
delayed group entity, and then the entity's parent's dequeue is delayed.
In that case:
1. In the if (entity_is_task(se)) else block at the beginning of
dequeue_entities(), slice is set to
cfs_rq_min_slice(group_cfs_rq(se)). If the entity was delayed, then
it has no queued tasks, so cfs_rq_min_slice() returns U64_MAX.
2. The first for_each_sched_entity() loop dequeues the entity.
3. If the entity was its parent's only child, then the next iteration
tries to dequeue the parent.
4. If the parent's dequeue needs to be delayed, then it breaks from the
first for_each_sched_entity() loop _without updating slice_.
5. The second for_each_sched_entity() loop sets the parent's ->slice to
the saved slice, which is still U64_MAX.
This throws off subsequent calculations with potentially catastrophic
results. A manifestation we saw in production was:
6. In update_entity_lag(), se->slice is used to calculate limit, which
ends up as a huge negative number.
7. limit is used in se->vlag = clamp(vlag, -limit, limit). Because limit
is negative, vlag > limit, so se->vlag is set to the same huge
negative number.
8. In place_entity(), se->vlag is scaled, which overflows and results in
another huge (positive or negative) number.
9. The adjusted lag is subtracted from se->vruntime, which increases or
decreases se->vruntime by a huge number.
10. pick_eevdf() calls entity_eligible()/vruntime_eligible(), which
incorrectly returns false because the vruntime is so far from the
other vruntimes on the queue, causing the
(vruntime - cfs_rq->min_vruntime) * load calulation to overflow.
11. Nothing appears to be eligible, so pick_eevdf() returns NULL.
12. pick_next_entity() tries to dereference the return value of
pick_eevdf() and crashes.
Dumping the cfs_rq states from the core dumps with drgn showed tell-tale
huge vruntime ranges and bogus vlag values, and I also traced se->slice
being set to U64_MAX on live systems (which was usually "benign" since
the rest of the runqueue needed to be in a particular state to crash).
Fix it in dequeue_entities() by always setting slice from the first
non-empty cfs_rq. |
| A vulnerability was discovered in RISC-V Rocket-Chip v1.6 and before implementation where the SRET (Supervisor-mode Exception Return) instruction fails to correctly transition the processor's privilege level. Instead of downgrading from Machine-mode (M-mode) to Supervisor-mode (S-mode) as specified by the sstatus.SPP bit, the processor incorrectly remains in M-mode, leading to a critical privilege retention vulnerability. |
| KERUI K259 5MP Wi-Fi / Tuya Smart Security Camera firmware v33.53.87 contains a code execution vulnerability in its boot/update logic: during startup /usr/sbin/anyka_service.sh scans mounted TF/SD cards and, if /mnt/update.nor.sh is present, copies it to /tmp/net.sh and executes it as root. |
| Arbitrary file deletion vulnerabilities have been identified in the command-line interface of an AOS-8 Controller/Mobility Conductor. Successful exploitation of these vulnerabilities could allow an authenticated remote malicious actor to delete arbitrary files within the affected system. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: return EIO on RAID1 block group write pointer mismatch
There was a bug report about a NULL pointer dereference in
__btrfs_add_free_space_zoned() that ultimately happens because a
conversion from the default metadata profile DUP to a RAID1 profile on two
disks.
The stack trace has the following signature:
BTRFS error (device sdc): zoned: write pointer offset mismatch of zones in raid1 profile
BUG: kernel NULL pointer dereference, address: 0000000000000058
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:__btrfs_add_free_space_zoned.isra.0+0x61/0x1a0
RSP: 0018:ffffa236b6f3f6d0 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff96c8132f3400 RCX: 0000000000000001
RDX: 0000000010000000 RSI: 0000000000000000 RDI: ffff96c8132f3410
RBP: 0000000010000000 R08: 0000000000000003 R09: 0000000000000000
R10: 0000000000000000 R11: 00000000ffffffff R12: 0000000000000000
R13: ffff96c758f65a40 R14: 0000000000000001 R15: 000011aac0000000
FS: 00007fdab1cb2900(0000) GS:ffff96e60ca00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000058 CR3: 00000001a05ae000 CR4: 0000000000350ef0
Call Trace:
<TASK>
? __die_body.cold+0x19/0x27
? page_fault_oops+0x15c/0x2f0
? exc_page_fault+0x7e/0x180
? asm_exc_page_fault+0x26/0x30
? __btrfs_add_free_space_zoned.isra.0+0x61/0x1a0
btrfs_add_free_space_async_trimmed+0x34/0x40
btrfs_add_new_free_space+0x107/0x120
btrfs_make_block_group+0x104/0x2b0
btrfs_create_chunk+0x977/0xf20
btrfs_chunk_alloc+0x174/0x510
? srso_return_thunk+0x5/0x5f
btrfs_inc_block_group_ro+0x1b1/0x230
btrfs_relocate_block_group+0x9e/0x410
btrfs_relocate_chunk+0x3f/0x130
btrfs_balance+0x8ac/0x12b0
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? __kmalloc_cache_noprof+0x14c/0x3e0
btrfs_ioctl+0x2686/0x2a80
? srso_return_thunk+0x5/0x5f
? ioctl_has_perm.constprop.0.isra.0+0xd2/0x120
__x64_sys_ioctl+0x97/0xc0
do_syscall_64+0x82/0x160
? srso_return_thunk+0x5/0x5f
? __memcg_slab_free_hook+0x11a/0x170
? srso_return_thunk+0x5/0x5f
? kmem_cache_free+0x3f0/0x450
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? syscall_exit_to_user_mode+0x10/0x210
? srso_return_thunk+0x5/0x5f
? do_syscall_64+0x8e/0x160
? sysfs_emit+0xaf/0xc0
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? seq_read_iter+0x207/0x460
? srso_return_thunk+0x5/0x5f
? vfs_read+0x29c/0x370
? srso_return_thunk+0x5/0x5f
? srso_return_thunk+0x5/0x5f
? syscall_exit_to_user_mode+0x10/0x210
? srso_return_thunk+0x5/0x5f
? do_syscall_64+0x8e/0x160
? srso_return_thunk+0x5/0x5f
? exc_page_fault+0x7e/0x180
entry_SYSCALL_64_after_hwframe+0x76/0x7e
RIP: 0033:0x7fdab1e0ca6d
RSP: 002b:00007ffeb2b60c80 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 00007fdab1e0ca6d
RDX: 00007ffeb2b60d80 RSI: 00000000c4009420 RDI: 0000000000000003
RBP: 00007ffeb2b60cd0 R08: 0000000000000000 R09: 0000000000000013
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffeb2b6343b R14: 00007ffeb2b60d80 R15: 0000000000000001
</TASK>
CR2: 0000000000000058
---[ end trace 0000000000000000 ]---
The 1st line is the most interesting here:
BTRFS error (device sdc): zoned: write pointer offset mismatch of zones in raid1 profile
When a RAID1 block-group is created and a write pointer mismatch between
the disks in the RAID set is detected, btrfs sets the alloc_offset to the
length of the block group marking it as full. Afterwards the code expects
that a balance operation will evacuate the data in this block-group and
repair the problems.
But before this is possible, the new space of this block-group will be
accounted in the free space cache. But in __btrfs_
---truncated--- |
| Arbitrary file deletion vulnerabilities have been identified in the command-line interface of an AOS-8 Controller/Mobility Conductor. Successful exploitation of these vulnerabilities could allow an authenticated remote malicious actor to delete arbitrary files within the affected system. |
| A vulnerability has been identified in Spectrum Power 4 (All versions < V4.70 SP12 Update 2). The affected application is vulnerable to run arbitrary commands via the user interface. This user interface can be used via the network and allows the execution of commands as administrative application user. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: don't replace page in rq_pages if it's a continuation of last page
The splice read calls nfsd_splice_actor to put the pages containing file
data into the svc_rqst->rq_pages array. It's possible however to get a
splice result that only has a partial page at the end, if (e.g.) the
filesystem hands back a short read that doesn't cover the whole page.
nfsd_splice_actor will plop the partial page into its rq_pages array and
return. Then later, when nfsd_splice_actor is called again, the
remainder of the page may end up being filled out. At this point,
nfsd_splice_actor will put the page into the array _again_ corrupting
the reply. If this is done enough times, rq_next_page will overrun the
array and corrupt the trailing fields -- the rq_respages and
rq_next_page pointers themselves.
If we've already added the page to the array in the last pass, don't add
it to the array a second time when dealing with a splice continuation.
This was originally handled properly in nfsd_splice_actor, but commit
91e23b1c3982 ("NFSD: Clean up nfsd_splice_actor()") removed the check
for it. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/shmem-helper: Remove another errant put in error path
drm_gem_shmem_mmap() doesn't own reference in error code path, resulting
in the dma-buf shmem GEM object getting prematurely freed leading to a
later use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: connac: do not check WED status for non-mmio devices
WED is supported just for mmio devices, so do not check it for usb or
sdio devices. This patch fixes the crash reported below:
[ 21.946627] wlp0s3u1i3: authenticate with c4:41:1e:f5:2b:1d
[ 22.525298] wlp0s3u1i3: send auth to c4:41:1e:f5:2b:1d (try 1/3)
[ 22.548274] wlp0s3u1i3: authenticate with c4:41:1e:f5:2b:1d
[ 22.557694] wlp0s3u1i3: send auth to c4:41:1e:f5:2b:1d (try 1/3)
[ 22.565885] wlp0s3u1i3: authenticated
[ 22.569502] wlp0s3u1i3: associate with c4:41:1e:f5:2b:1d (try 1/3)
[ 22.578966] wlp0s3u1i3: RX AssocResp from c4:41:1e:f5:2b:1d (capab=0x11 status=30 aid=3)
[ 22.579113] wlp0s3u1i3: c4:41:1e:f5:2b:1d rejected association temporarily; comeback duration 1000 TU (1024 ms)
[ 23.649518] wlp0s3u1i3: associate with c4:41:1e:f5:2b:1d (try 2/3)
[ 23.752528] wlp0s3u1i3: RX AssocResp from c4:41:1e:f5:2b:1d (capab=0x11 status=0 aid=3)
[ 23.797450] wlp0s3u1i3: associated
[ 24.959527] kernel tried to execute NX-protected page - exploit attempt? (uid: 0)
[ 24.959640] BUG: unable to handle page fault for address: ffff88800c223200
[ 24.959706] #PF: supervisor instruction fetch in kernel mode
[ 24.959788] #PF: error_code(0x0011) - permissions violation
[ 24.959846] PGD 2c01067 P4D 2c01067 PUD 2c02067 PMD c2a8063 PTE 800000000c223163
[ 24.959957] Oops: 0011 [#1] PREEMPT SMP
[ 24.960009] CPU: 0 PID: 391 Comm: wpa_supplicant Not tainted 6.2.0-kvm #18
[ 24.960089] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.1-2.fc37 04/01/2014
[ 24.960191] RIP: 0010:0xffff88800c223200
[ 24.960446] RSP: 0018:ffffc90000ff7698 EFLAGS: 00010282
[ 24.960513] RAX: ffff888028397010 RBX: ffff88800c26e630 RCX: 0000000000000058
[ 24.960598] RDX: ffff88800c26f844 RSI: 0000000000000006 RDI: ffff888028397010
[ 24.960682] RBP: ffff88800ea72f00 R08: 18b873fbab2b964c R09: be06b38235f3c63c
[ 24.960766] R10: 18b873fbab2b964c R11: be06b38235f3c63c R12: 0000000000000001
[ 24.960853] R13: ffff88800c26f84c R14: ffff8880063f0ff8 R15: ffff88800c26e644
[ 24.960950] FS: 00007effcea327c0(0000) GS:ffff88807dc00000(0000) knlGS:0000000000000000
[ 24.961036] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 24.961106] CR2: ffff88800c223200 CR3: 000000000eaa2000 CR4: 00000000000006b0
[ 24.961190] Call Trace:
[ 24.961219] <TASK>
[ 24.961245] ? mt76_connac_mcu_add_key+0x2cf/0x310
[ 24.961313] ? mt7921_set_key+0x150/0x200
[ 24.961365] ? drv_set_key+0xa9/0x1b0
[ 24.961418] ? ieee80211_key_enable_hw_accel+0xd9/0x240
[ 24.961485] ? ieee80211_key_replace+0x3f3/0x730
[ 24.961541] ? crypto_shash_setkey+0x89/0xd0
[ 24.961597] ? ieee80211_key_link+0x2d7/0x3a0
[ 24.961664] ? crypto_aead_setauthsize+0x31/0x50
[ 24.961730] ? sta_info_hash_lookup+0xa6/0xf0
[ 24.961785] ? ieee80211_add_key+0x1fc/0x250
[ 24.961842] ? rdev_add_key+0x41/0x140
[ 24.961882] ? nl80211_parse_key+0x6c/0x2f0
[ 24.961940] ? nl80211_new_key+0x24a/0x290
[ 24.961984] ? genl_rcv_msg+0x36c/0x3a0
[ 24.962036] ? rdev_mod_link_station+0xe0/0xe0
[ 24.962102] ? nl80211_set_key+0x410/0x410
[ 24.962143] ? nl80211_pre_doit+0x200/0x200
[ 24.962187] ? genl_bind+0xc0/0xc0
[ 24.962217] ? netlink_rcv_skb+0xaa/0xd0
[ 24.962259] ? genl_rcv+0x24/0x40
[ 24.962300] ? netlink_unicast+0x224/0x2f0
[ 24.962345] ? netlink_sendmsg+0x30b/0x3d0
[ 24.962388] ? ____sys_sendmsg+0x109/0x1b0
[ 24.962388] ? ____sys_sendmsg+0x109/0x1b0
[ 24.962440] ? __import_iovec+0x2e/0x110
[ 24.962482] ? ___sys_sendmsg+0xbe/0xe0
[ 24.962525] ? mod_objcg_state+0x25c/0x330
[ 24.962576] ? __dentry_kill+0x19e/0x1d0
[ 24.962618] ? call_rcu+0x18f/0x270
[ 24.962660] ? __dentry_kill+0x19e/0x1d0
[ 24.962702] ? __x64_sys_sendmsg+0x70/0x90
[ 24.962744] ? do_syscall_64+0x3d/0x80
[ 24.962796] ? exit_to_user_mode_prepare+0x1b/0x70
[ 24.962852] ? entry_SYSCA
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915/active: Fix misuse of non-idle barriers as fence trackers
Users reported oopses on list corruptions when using i915 perf with a
number of concurrently running graphics applications. Root cause analysis
pointed at an issue in barrier processing code -- a race among perf open /
close replacing active barriers with perf requests on kernel context and
concurrent barrier preallocate / acquire operations performed during user
context first pin / last unpin.
When adding a request to a composite tracker, we try to reuse an existing
fence tracker, already allocated and registered with that composite. The
tracker we obtain may already track another fence, may be an idle barrier,
or an active barrier.
If the tracker we get occurs a non-idle barrier then we try to delete that
barrier from a list of barrier tasks it belongs to. However, while doing
that we don't respect return value from a function that performs the
barrier deletion. Should the deletion ever fail, we would end up reusing
the tracker still registered as a barrier task. Since the same structure
field is reused with both fence callback lists and barrier tasks list,
list corruptions would likely occur.
Barriers are now deleted from a barrier tasks list by temporarily removing
the list content, traversing that content with skip over the node to be
deleted, then populating the list back with the modified content. Should
that intentionally racy concurrent deletion attempts be not serialized,
one or more of those may fail because of the list being temporary empty.
Related code that ignores the results of barrier deletion was initially
introduced in v5.4 by commit d8af05ff38ae ("drm/i915: Allow sharing the
idle-barrier from other kernel requests"). However, all users of the
barrier deletion routine were apparently serialized at that time, then the
issue didn't exhibit itself. Results of git bisect with help of a newly
developed igt@gem_barrier_race@remote-request IGT test indicate that list
corruptions might start to appear after commit 311770173fac ("drm/i915/gt:
Schedule request retirement when timeline idles"), introduced in v5.5.
Respect results of barrier deletion attempts -- mark the barrier as idle
only if successfully deleted from the list. Then, before proceeding with
setting our fence as the one currently tracked, make sure that the tracker
we've got is not a non-idle barrier. If that check fails then don't use
that tracker but go back and try to acquire a new, usable one.
v3: use unlikely() to document what outcome we expect (Andi),
- fix bad grammar in commit description.
v2: no code changes,
- blame commit 311770173fac ("drm/i915/gt: Schedule request retirement
when timeline idles"), v5.5, not commit d8af05ff38ae ("drm/i915: Allow
sharing the idle-barrier from other kernel requests"), v5.4,
- reword commit description.
(cherry picked from commit 506006055769b10d1b2b4e22f636f3b45e0e9fc7) |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix UaF in listener shutdown
As reported by Christoph after having refactored the passive
socket initialization, the mptcp listener shutdown path is prone
to an UaF issue.
BUG: KASAN: use-after-free in _raw_spin_lock_bh+0x73/0xe0
Write of size 4 at addr ffff88810cb23098 by task syz-executor731/1266
CPU: 1 PID: 1266 Comm: syz-executor731 Not tainted 6.2.0-rc59af4eaa31c1f6c00c8f1e448ed99a45c66340dd5 #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x6e/0x91
print_report+0x16a/0x46f
kasan_report+0xad/0x130
kasan_check_range+0x14a/0x1a0
_raw_spin_lock_bh+0x73/0xe0
subflow_error_report+0x6d/0x110
sk_error_report+0x3b/0x190
tcp_disconnect+0x138c/0x1aa0
inet_child_forget+0x6f/0x2e0
inet_csk_listen_stop+0x209/0x1060
__mptcp_close_ssk+0x52d/0x610
mptcp_destroy_common+0x165/0x640
mptcp_destroy+0x13/0x80
__mptcp_destroy_sock+0xe7/0x270
__mptcp_close+0x70e/0x9b0
mptcp_close+0x2b/0x150
inet_release+0xe9/0x1f0
__sock_release+0xd2/0x280
sock_close+0x15/0x20
__fput+0x252/0xa20
task_work_run+0x169/0x250
exit_to_user_mode_prepare+0x113/0x120
syscall_exit_to_user_mode+0x1d/0x40
do_syscall_64+0x48/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
The msk grace period can legitly expire in between the last
reference count dropped in mptcp_subflow_queue_clean() and
the later eventual access in inet_csk_listen_stop()
After the previous patch we don't need anymore special-casing
msk listener socket cleanup: the mptcp worker will process each
of the unaccepted msk sockets.
Just drop the now unnecessary code.
Please note this commit depends on the two parent ones:
mptcp: refactor passive socket initialization
mptcp: use the workqueue to destroy unaccepted sockets |
| Arbitrary file deletion vulnerabilities have been identified in the command-line interface of an AOS-8 Controller/Mobility Conductor. Successful exploitation of these vulnerabilities could allow an authenticated remote malicious actor to delete arbitrary files within the affected system. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Fix an illegal memory access
In the kfd_wait_on_events() function, the kfd_event_waiter structure is
allocated by alloc_event_waiters(), but the event field of the waiter
structure is not initialized; When copy_from_user() fails in the
kfd_wait_on_events() function, it will enter exception handling to
release the previously allocated memory of the waiter structure;
Due to the event field of the waiters structure being accessed
in the free_waiters() function, this results in illegal memory access
and system crash, here is the crash log:
localhost kernel: RIP: 0010:native_queued_spin_lock_slowpath+0x185/0x1e0
localhost kernel: RSP: 0018:ffffaa53c362bd60 EFLAGS: 00010082
localhost kernel: RAX: ff3d3d6bff4007cb RBX: 0000000000000282 RCX: 00000000002c0000
localhost kernel: RDX: ffff9e855eeacb80 RSI: 000000000000279c RDI: ffffe7088f6a21d0
localhost kernel: RBP: ffffe7088f6a21d0 R08: 00000000002c0000 R09: ffffaa53c362be64
localhost kernel: R10: ffffaa53c362bbd8 R11: 0000000000000001 R12: 0000000000000002
localhost kernel: R13: ffff9e7ead15d600 R14: 0000000000000000 R15: ffff9e7ead15d698
localhost kernel: FS: 0000152a3d111700(0000) GS:ffff9e855ee80000(0000) knlGS:0000000000000000
localhost kernel: CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
localhost kernel: CR2: 0000152938000010 CR3: 000000044d7a4000 CR4: 00000000003506e0
localhost kernel: Call Trace:
localhost kernel: _raw_spin_lock_irqsave+0x30/0x40
localhost kernel: remove_wait_queue+0x12/0x50
localhost kernel: kfd_wait_on_events+0x1b6/0x490 [hydcu]
localhost kernel: ? ftrace_graph_caller+0xa0/0xa0
localhost kernel: kfd_ioctl+0x38c/0x4a0 [hydcu]
localhost kernel: ? kfd_ioctl_set_trap_handler+0x70/0x70 [hydcu]
localhost kernel: ? kfd_ioctl_create_queue+0x5a0/0x5a0 [hydcu]
localhost kernel: ? ftrace_graph_caller+0xa0/0xa0
localhost kernel: __x64_sys_ioctl+0x8e/0xd0
localhost kernel: ? syscall_trace_enter.isra.18+0x143/0x1b0
localhost kernel: do_syscall_64+0x33/0x80
localhost kernel: entry_SYSCALL_64_after_hwframe+0x44/0xa9
localhost kernel: RIP: 0033:0x152a4dff68d7
Allocate the structure with kcalloc, and remove redundant 0-initialization
and a redundant loop condition check. |
| An authenticated command injection vulnerability exists in the command line interface binary of AOS-10 GW and AOS-8 Controllers/Mobility Conductor operating system. Exploitation of this vulnerability requires physical access to the hardware controllers. A successful attack could allow an authenticated malicious actor with physical access to execute arbitrary commands as a privileged user on the underlying operating system. |
| A vulnerability has been identified in Spectrum Power 4 (All versions < V4.70 SP12 Update 2). The affected application is vulnerable to alter the local database which contains the application credentials. This allows an attacker to gain administrative application privileges. |
