| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p: Fix a potential socket leak in p9_socket_open
Both p9_fd_create_tcp() and p9_fd_create_unix() will call
p9_socket_open(). If the creation of p9_trans_fd fails,
p9_fd_create_tcp() and p9_fd_create_unix() will return an
error directly instead of releasing the cscoket, which will
result in a socket leak.
This patch adds sock_release() to fix the leak issue. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ethernet: nixge: fix NULL dereference
In function nixge_hw_dma_bd_release() dereference of NULL pointer
priv->rx_bd_v is possible for the case of its allocation failure in
nixge_hw_dma_bd_init().
Move for() loop with priv->rx_bd_v dereference under the check for
its validity.
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: re-fetch skb cb after tipc_msg_validate
As the call trace shows, the original skb was freed in tipc_msg_validate(),
and dereferencing the old skb cb would cause an use-after-free crash.
BUG: KASAN: use-after-free in tipc_crypto_rcv_complete+0x1835/0x2240 [tipc]
Call Trace:
<IRQ>
tipc_crypto_rcv_complete+0x1835/0x2240 [tipc]
tipc_crypto_rcv+0xd32/0x1ec0 [tipc]
tipc_rcv+0x744/0x1150 [tipc]
...
Allocated by task 47078:
kmem_cache_alloc_node+0x158/0x4d0
__alloc_skb+0x1c1/0x270
tipc_buf_acquire+0x1e/0xe0 [tipc]
tipc_msg_create+0x33/0x1c0 [tipc]
tipc_link_build_proto_msg+0x38a/0x2100 [tipc]
tipc_link_timeout+0x8b8/0xef0 [tipc]
tipc_node_timeout+0x2a1/0x960 [tipc]
call_timer_fn+0x2d/0x1c0
...
Freed by task 47078:
tipc_msg_validate+0x7b/0x440 [tipc]
tipc_crypto_rcv_complete+0x4b5/0x2240 [tipc]
tipc_crypto_rcv+0xd32/0x1ec0 [tipc]
tipc_rcv+0x744/0x1150 [tipc]
This patch fixes it by re-fetching the skb cb from the new allocated skb
after calling tipc_msg_validate(). |
| In the Linux kernel, the following vulnerability has been resolved:
net: mdiobus: fix unbalanced node reference count
I got the following report while doing device(mscc-miim) load test
with CONFIG_OF_UNITTEST and CONFIG_OF_DYNAMIC enabled:
OF: ERROR: memory leak, expected refcount 1 instead of 2,
of_node_get()/of_node_put() unbalanced - destroy cset entry:
attach overlay node /spi/soc@0/mdio@7107009c/ethernet-phy@0
If the 'fwnode' is not an acpi node, the refcount is get in
fwnode_mdiobus_phy_device_register(), but it has never been
put when the device is freed in the normal path. So call
fwnode_handle_put() in phy_device_release() to avoid leak.
If it's an acpi node, it has never been get, but it's put
in the error path, so call fwnode_handle_get() before
phy_device_register() to keep get/put operation balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hsr: Fix potential use-after-free
The skb is delivered to netif_rx() which may free it, after calling this,
dereferencing skb may trigger use-after-free. |
| In the Linux kernel, the following vulnerability has been resolved:
net: tun: Fix use-after-free in tun_detach()
syzbot reported use-after-free in tun_detach() [1]. This causes call
trace like below:
==================================================================
BUG: KASAN: use-after-free in notifier_call_chain+0x1ee/0x200 kernel/notifier.c:75
Read of size 8 at addr ffff88807324e2a8 by task syz-executor.0/3673
CPU: 0 PID: 3673 Comm: syz-executor.0 Not tainted 6.1.0-rc5-syzkaller-00044-gcc675d22e422 #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 10/26/2022
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:88 [inline]
dump_stack_lvl+0xd1/0x138 lib/dump_stack.c:106
print_address_description mm/kasan/report.c:284 [inline]
print_report+0x15e/0x461 mm/kasan/report.c:395
kasan_report+0xbf/0x1f0 mm/kasan/report.c:495
notifier_call_chain+0x1ee/0x200 kernel/notifier.c:75
call_netdevice_notifiers_info+0x86/0x130 net/core/dev.c:1942
call_netdevice_notifiers_extack net/core/dev.c:1983 [inline]
call_netdevice_notifiers net/core/dev.c:1997 [inline]
netdev_wait_allrefs_any net/core/dev.c:10237 [inline]
netdev_run_todo+0xbc6/0x1100 net/core/dev.c:10351
tun_detach drivers/net/tun.c:704 [inline]
tun_chr_close+0xe4/0x190 drivers/net/tun.c:3467
__fput+0x27c/0xa90 fs/file_table.c:320
task_work_run+0x16f/0x270 kernel/task_work.c:179
exit_task_work include/linux/task_work.h:38 [inline]
do_exit+0xb3d/0x2a30 kernel/exit.c:820
do_group_exit+0xd4/0x2a0 kernel/exit.c:950
get_signal+0x21b1/0x2440 kernel/signal.c:2858
arch_do_signal_or_restart+0x86/0x2300 arch/x86/kernel/signal.c:869
exit_to_user_mode_loop kernel/entry/common.c:168 [inline]
exit_to_user_mode_prepare+0x15f/0x250 kernel/entry/common.c:203
__syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
syscall_exit_to_user_mode+0x1d/0x50 kernel/entry/common.c:296
do_syscall_64+0x46/0xb0 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x63/0xcd
The cause of the issue is that sock_put() from __tun_detach() drops
last reference count for struct net, and then notifier_call_chain()
from netdev_state_change() accesses that struct net.
This patch fixes the issue by calling sock_put() from tun_detach()
after all necessary accesses for the struct net has done. |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: fix memory leak in sctp_stream_outq_migrate()
When sctp_stream_outq_migrate() is called to release stream out resources,
the memory pointed to by prio_head in stream out is not released.
The memory leak information is as follows:
unreferenced object 0xffff88801fe79f80 (size 64):
comm "sctp_repo", pid 7957, jiffies 4294951704 (age 36.480s)
hex dump (first 32 bytes):
80 9f e7 1f 80 88 ff ff 80 9f e7 1f 80 88 ff ff ................
90 9f e7 1f 80 88 ff ff 90 9f e7 1f 80 88 ff ff ................
backtrace:
[<ffffffff81b215c6>] kmalloc_trace+0x26/0x60
[<ffffffff88ae517c>] sctp_sched_prio_set+0x4cc/0x770
[<ffffffff88ad64f2>] sctp_stream_init_ext+0xd2/0x1b0
[<ffffffff88aa2604>] sctp_sendmsg_to_asoc+0x1614/0x1a30
[<ffffffff88ab7ff1>] sctp_sendmsg+0xda1/0x1ef0
[<ffffffff87f765ed>] inet_sendmsg+0x9d/0xe0
[<ffffffff8754b5b3>] sock_sendmsg+0xd3/0x120
[<ffffffff8755446a>] __sys_sendto+0x23a/0x340
[<ffffffff87554651>] __x64_sys_sendto+0xe1/0x1b0
[<ffffffff89978b49>] do_syscall_64+0x39/0xb0
[<ffffffff89a0008b>] entry_SYSCALL_64_after_hwframe+0x63/0xcd |
| In the Linux kernel, the following vulnerability has been resolved:
afs: Fix server->active leak in afs_put_server
The atomic_read was accidentally replaced with atomic_inc_return,
which prevents the server from getting cleaned up and causes rmmod
to hang with a warning:
Can't purge s=00000001 |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (coretemp) fix pci device refcount leak in nv1a_ram_new()
As comment of pci_get_domain_bus_and_slot() says, it returns
a pci device with refcount increment, when finish using it,
the caller must decrement the reference count by calling
pci_dev_put(). So call it after using to avoid refcount leak. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (coretemp) Check for null before removing sysfs attrs
If coretemp_add_core() gets an error then pdata->core_data[indx]
is already NULL and has been kfreed. Don't pass that to
sysfs_remove_group() as that will crash in sysfs_remove_group().
[Shortened for readability]
[91854.020159] sysfs: cannot create duplicate filename '/devices/platform/coretemp.0/hwmon/hwmon2/temp20_label'
<cpu offline>
[91855.126115] BUG: kernel NULL pointer dereference, address: 0000000000000188
[91855.165103] #PF: supervisor read access in kernel mode
[91855.194506] #PF: error_code(0x0000) - not-present page
[91855.224445] PGD 0 P4D 0
[91855.238508] Oops: 0000 [#1] PREEMPT SMP PTI
...
[91855.342716] RIP: 0010:sysfs_remove_group+0xc/0x80
...
[91855.796571] Call Trace:
[91855.810524] coretemp_cpu_offline+0x12b/0x1dd [coretemp]
[91855.841738] ? coretemp_cpu_online+0x180/0x180 [coretemp]
[91855.871107] cpuhp_invoke_callback+0x105/0x4b0
[91855.893432] cpuhp_thread_fun+0x8e/0x150
...
Fix this by checking for NULL first. |
| In the Linux kernel, the following vulnerability has been resolved:
hwmon: (asus-ec-sensors) Add checks for devm_kcalloc
As the devm_kcalloc may return NULL, the return value needs to be checked
to avoid NULL poineter dereference. |
| In the Linux kernel, the following vulnerability has been resolved:
can: can327: can327_feed_frame_to_netdev(): fix potential skb leak when netdev is down
In can327_feed_frame_to_netdev(), it did not free the skb when netdev
is down, and all callers of can327_feed_frame_to_netdev() did not free
allocated skb too. That would trigger skb leak.
Fix it by adding kfree_skb() in can327_feed_frame_to_netdev() when netdev
is down. Not tested, just compiled. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Free buffers when a used dynamic event is removed
After 65536 dynamic events have been added and removed, the "type" field
of the event then uses the first type number that is available (not
currently used by other events). A type number is the identifier of the
binary blobs in the tracing ring buffer (known as events) to map them to
logic that can parse the binary blob.
The issue is that if a dynamic event (like a kprobe event) is traced and
is in the ring buffer, and then that event is removed (because it is
dynamic, which means it can be created and destroyed), if another dynamic
event is created that has the same number that new event's logic on
parsing the binary blob will be used.
To show how this can be an issue, the following can crash the kernel:
# cd /sys/kernel/tracing
# for i in `seq 65536`; do
echo 'p:kprobes/foo do_sys_openat2 $arg1:u32' > kprobe_events
# done
For every iteration of the above, the writing to the kprobe_events will
remove the old event and create a new one (with the same format) and
increase the type number to the next available on until the type number
reaches over 65535 which is the max number for the 16 bit type. After it
reaches that number, the logic to allocate a new number simply looks for
the next available number. When an dynamic event is removed, that number
is then available to be reused by the next dynamic event created. That is,
once the above reaches the max number, the number assigned to the event in
that loop will remain the same.
Now that means deleting one dynamic event and created another will reuse
the previous events type number. This is where bad things can happen.
After the above loop finishes, the kprobes/foo event which reads the
do_sys_openat2 function call's first parameter as an integer.
# echo 1 > kprobes/foo/enable
# cat /etc/passwd > /dev/null
# cat trace
cat-2211 [005] .... 2007.849603: foo: (do_sys_openat2+0x0/0x130) arg1=4294967196
cat-2211 [005] .... 2007.849620: foo: (do_sys_openat2+0x0/0x130) arg1=4294967196
cat-2211 [005] .... 2007.849838: foo: (do_sys_openat2+0x0/0x130) arg1=4294967196
cat-2211 [005] .... 2007.849880: foo: (do_sys_openat2+0x0/0x130) arg1=4294967196
# echo 0 > kprobes/foo/enable
Now if we delete the kprobe and create a new one that reads a string:
# echo 'p:kprobes/foo do_sys_openat2 +0($arg2):string' > kprobe_events
And now we can the trace:
# cat trace
sendmail-1942 [002] ..... 530.136320: foo: (do_sys_openat2+0x0/0x240) arg1= cat-2046 [004] ..... 530.930817: foo: (do_sys_openat2+0x0/0x240) arg1="������������������������������������������������������������������������������������������������"
cat-2046 [004] ..... 530.930961: foo: (do_sys_openat2+0x0/0x240) arg1="������������������������������������������������������������������������������������������������"
cat-2046 [004] ..... 530.934278: foo: (do_sys_openat2+0x0/0x240) arg1="������������������������������������������������������������������������������������������������"
cat-2046 [004] ..... 530.934563: foo: (do_sys_openat2+0x0/0x240) arg1="���������������������������������������
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: Sync efi page table's kernel mappings before switching
The EFI page table is initially created as a copy of the kernel page table.
With VMAP_STACK enabled, kernel stacks are allocated in the vmalloc area:
if the stack is allocated in a new PGD (one that was not present at the
moment of the efi page table creation or not synced in a previous vmalloc
fault), the kernel will take a trap when switching to the efi page table
when the vmalloc kernel stack is accessed, resulting in a kernel panic.
Fix that by updating the efi kernel mappings before switching to the efi
page table. |
| In the Linux kernel, the following vulnerability has been resolved:
nvme: fix SRCU protection of nvme_ns_head list
Walking the nvme_ns_head siblings list is protected by the head's srcu
in nvme_ns_head_submit_bio() but not nvme_mpath_revalidate_paths().
Removing namespaces from the list also fails to synchronize the srcu.
Concurrent scan work can therefore cause use-after-frees.
Hold the head's srcu lock in nvme_mpath_revalidate_paths() and
synchronize with the srcu, not the global RCU, in nvme_ns_remove().
Observed the following panic when making NVMe/RDMA connections
with native multipath on the Rocky Linux 8.6 kernel
(it seems the upstream kernel has the same race condition).
Disassembly shows the faulting instruction is cmp 0x50(%rdx),%rcx;
computing capacity != get_capacity(ns->disk).
Address 0x50 is dereferenced because ns->disk is NULL.
The NULL disk appears to be the result of concurrent scan work
freeing the namespace (note the log line in the middle of the panic).
[37314.206036] BUG: unable to handle kernel NULL pointer dereference at 0000000000000050
[37314.206036] nvme0n3: detected capacity change from 0 to 11811160064
[37314.299753] PGD 0 P4D 0
[37314.299756] Oops: 0000 [#1] SMP PTI
[37314.299759] CPU: 29 PID: 322046 Comm: kworker/u98:3 Kdump: loaded Tainted: G W X --------- - - 4.18.0-372.32.1.el8test86.x86_64 #1
[37314.299762] Hardware name: Dell Inc. PowerEdge R720/0JP31P, BIOS 2.7.0 05/23/2018
[37314.299763] Workqueue: nvme-wq nvme_scan_work [nvme_core]
[37314.299783] RIP: 0010:nvme_mpath_revalidate_paths+0x26/0xb0 [nvme_core]
[37314.299790] Code: 1f 44 00 00 66 66 66 66 90 55 53 48 8b 5f 50 48 8b 83 c8 c9 00 00 48 8b 13 48 8b 48 50 48 39 d3 74 20 48 8d 42 d0 48 8b 50 20 <48> 3b 4a 50 74 05 f0 80 60 70 ef 48 8b 50 30 48 8d 42 d0 48 39 d3
[37315.058803] RSP: 0018:ffffabe28f913d10 EFLAGS: 00010202
[37315.121316] RAX: ffff927a077da800 RBX: ffff92991dd70000 RCX: 0000000001600000
[37315.206704] RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff92991b719800
[37315.292106] RBP: ffff929a6b70c000 R08: 000000010234cd4a R09: c0000000ffff7fff
[37315.377501] R10: 0000000000000001 R11: ffffabe28f913a30 R12: 0000000000000000
[37315.462889] R13: ffff92992716600c R14: ffff929964e6e030 R15: ffff92991dd70000
[37315.548286] FS: 0000000000000000(0000) GS:ffff92b87fb80000(0000) knlGS:0000000000000000
[37315.645111] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[37315.713871] CR2: 0000000000000050 CR3: 0000002208810006 CR4: 00000000000606e0
[37315.799267] Call Trace:
[37315.828515] nvme_update_ns_info+0x1ac/0x250 [nvme_core]
[37315.892075] nvme_validate_or_alloc_ns+0x2ff/0xa00 [nvme_core]
[37315.961871] ? __blk_mq_free_request+0x6b/0x90
[37316.015021] nvme_scan_work+0x151/0x240 [nvme_core]
[37316.073371] process_one_work+0x1a7/0x360
[37316.121318] ? create_worker+0x1a0/0x1a0
[37316.168227] worker_thread+0x30/0x390
[37316.212024] ? create_worker+0x1a0/0x1a0
[37316.258939] kthread+0x10a/0x120
[37316.297557] ? set_kthread_struct+0x50/0x50
[37316.347590] ret_from_fork+0x35/0x40
[37316.390360] Modules linked in: nvme_rdma nvme_tcp(X) nvme_fabrics nvme_core netconsole iscsi_tcp libiscsi_tcp dm_queue_length dm_service_time nf_conntrack_netlink br_netfilter bridge stp llc overlay nft_chain_nat ipt_MASQUERADE nf_nat xt_addrtype xt_CT nft_counter xt_state xt_conntrack nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 xt_comment xt_multiport nft_compat nf_tables libcrc32c nfnetlink dm_multipath tg3 rpcrdma sunrpc rdma_ucm ib_srpt ib_isert iscsi_target_mod target_core_mod ib_iser libiscsi scsi_transport_iscsi ib_umad rdma_cm ib_ipoib iw_cm ib_cm intel_rapl_msr iTCO_wdt iTCO_vendor_support dcdbas intel_rapl_common sb_edac x86_pkg_temp_thermal intel_powerclamp coretemp kvm_intel ipmi_ssif kvm irqbypass crct10dif_pclmul crc32_pclmul mlx5_ib ghash_clmulni_intel ib_uverbs rapl intel_cstate intel_uncore ib_core ipmi_si joydev mei_me pcspkr ipmi_devintf mei lpc_ich wmi ipmi_msghandler acpi_power_meter ex
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Fix PCI device refcount leak in dmar_dev_scope_init()
for_each_pci_dev() is implemented by pci_get_device(). The comment of
pci_get_device() says that it will increase the reference count for the
returned pci_dev and also decrease the reference count for the input
pci_dev @from if it is not NULL.
If we break for_each_pci_dev() loop with pdev not NULL, we need to call
pci_dev_put() to decrease the reference count. Add the missing
pci_dev_put() for the error path to avoid reference count leak. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: fix race when vmap stack overflow
Currently, when detecting vmap stack overflow, riscv firstly switches
to the so called shadow stack, then use this shadow stack to call the
get_overflow_stack() to get the overflow stack. However, there's
a race here if two or more harts use the same shadow stack at the same
time.
To solve this race, we introduce spin_shadow_stack atomic var, which
will be swap between its own address and 0 in atomic way, when the
var is set, it means the shadow_stack is being used; when the var
is cleared, it means the shadow_stack isn't being used.
[Palmer: Add AQ to the swap, and also some comments.] |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/vt-d: Fix PCI device refcount leak in has_external_pci()
for_each_pci_dev() is implemented by pci_get_device(). The comment of
pci_get_device() says that it will increase the reference count for the
returned pci_dev and also decrease the reference count for the input
pci_dev @from if it is not NULL.
If we break for_each_pci_dev() loop with pdev not NULL, we need to call
pci_dev_put() to decrease the reference count. Add the missing
pci_dev_put() before 'return true' to avoid reference count leak. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: Handle attempt to delete multipath route when fib_info contains an nh reference
Gwangun Jung reported a slab-out-of-bounds access in fib_nh_match:
fib_nh_match+0xf98/0x1130 linux-6.0-rc7/net/ipv4/fib_semantics.c:961
fib_table_delete+0x5f3/0xa40 linux-6.0-rc7/net/ipv4/fib_trie.c:1753
inet_rtm_delroute+0x2b3/0x380 linux-6.0-rc7/net/ipv4/fib_frontend.c:874
Separate nexthop objects are mutually exclusive with the legacy
multipath spec. Fix fib_nh_match to return if the config for the
to be deleted route contains a multipath spec while the fib_info
is using a nexthop object. |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/bpf/32: Fix Oops on tail call tests
test_bpf tail call tests end up as:
test_bpf: #0 Tail call leaf jited:1 85 PASS
test_bpf: #1 Tail call 2 jited:1 111 PASS
test_bpf: #2 Tail call 3 jited:1 145 PASS
test_bpf: #3 Tail call 4 jited:1 170 PASS
test_bpf: #4 Tail call load/store leaf jited:1 190 PASS
test_bpf: #5 Tail call load/store jited:1
BUG: Unable to handle kernel data access on write at 0xf1b4e000
Faulting instruction address: 0xbe86b710
Oops: Kernel access of bad area, sig: 11 [#1]
BE PAGE_SIZE=4K MMU=Hash PowerMac
Modules linked in: test_bpf(+)
CPU: 0 PID: 97 Comm: insmod Not tainted 6.1.0-rc4+ #195
Hardware name: PowerMac3,1 750CL 0x87210 PowerMac
NIP: be86b710 LR: be857e88 CTR: be86b704
REGS: f1b4df20 TRAP: 0300 Not tainted (6.1.0-rc4+)
MSR: 00009032 <EE,ME,IR,DR,RI> CR: 28008242 XER: 00000000
DAR: f1b4e000 DSISR: 42000000
GPR00: 00000001 f1b4dfe0 c11d2280 00000000 00000000 00000000 00000002 00000000
GPR08: f1b4e000 be86b704 f1b4e000 00000000 00000000 100d816a f2440000 fe73baa8
GPR16: f2458000 00000000 c1941ae4 f1fe2248 00000045 c0de0000 f2458030 00000000
GPR24: 000003e8 0000000f f2458000 f1b4dc90 3e584b46 00000000 f24466a0 c1941a00
NIP [be86b710] 0xbe86b710
LR [be857e88] __run_one+0xec/0x264 [test_bpf]
Call Trace:
[f1b4dfe0] [00000002] 0x2 (unreliable)
Instruction dump:
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
---[ end trace 0000000000000000 ]---
This is a tentative to write above the stack. The problem is encoutered
with tests added by commit 38608ee7b690 ("bpf, tests: Add load store
test case for tail call")
This happens because tail call is done to a BPF prog with a different
stack_depth. At the time being, the stack is kept as is when the caller
tail calls its callee. But at exit, the callee restores the stack based
on its own properties. Therefore here, at each run, r1 is erroneously
increased by 32 - 16 = 16 bytes.
This was done that way in order to pass the tail call count from caller
to callee through the stack. As powerpc32 doesn't have a red zone in
the stack, it was necessary the maintain the stack as is for the tail
call. But it was not anticipated that the BPF frame size could be
different.
Let's take a new approach. Use register r4 to carry the tail call count
during the tail call, and save it into the stack at function entry if
required. This means the input parameter must be in r3, which is more
correct as it is a 32 bits parameter, then tail call better match with
normal BPF function entry, the down side being that we move that input
parameter back and forth between r3 and r4. That can be optimised later.
Doing that also has the advantage of maximising the common parts between
tail calls and a normal function exit.
With the fix, tail call tests are now successfull:
test_bpf: #0 Tail call leaf jited:1 53 PASS
test_bpf: #1 Tail call 2 jited:1 115 PASS
test_bpf: #2 Tail call 3 jited:1 154 PASS
test_bpf: #3 Tail call 4 jited:1 165 PASS
test_bpf: #4 Tail call load/store leaf jited:1 101 PASS
test_bpf: #5 Tail call load/store jited:1 141 PASS
test_bpf: #6 Tail call error path, max count reached jited:1 994 PASS
test_bpf: #7 Tail call count preserved across function calls jited:1 140975 PASS
test_bpf: #8 Tail call error path, NULL target jited:1 110 PASS
test_bpf: #9 Tail call error path, index out of range jited:1 69 PASS
test_bpf: test_tail_calls: Summary: 10 PASSED, 0 FAILED, [10/10 JIT'ed] |
