| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Memory corruption while handling repeated memory unmap requests from guest VM. |
| Memory corruption due to double free when multiple threads race to set the timestamp store. |
| Memory corruption due to global buffer overflow when a test command uses an invalid payload type. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/edid: In connector_bad_edid() cap num_of_ext by num_blocks read
In commit e11f5bd8228f ("drm: Add support for DP 1.4 Compliance edid
corruption test") the function connector_bad_edid() started assuming
that the memory for the EDID passed to it was big enough to hold
`edid[0x7e] + 1` blocks of data (1 extra for the base block). It
completely ignored the fact that the function was passed `num_blocks`
which indicated how much memory had been allocated for the EDID.
Let's fix this by adding a bounds check.
This is important for handling the case where there's an error in the
first block of the EDID. In that case we will call
connector_bad_edid() without having re-allocated memory based on
`edid[0x7e]`. |
| Use after free in Dawn in Google Chrome prior to 140.0.7339.185 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) |
| Use after free in WebRTC in Google Chrome prior to 140.0.7339.185 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) |
| Heap buffer overflow in ANGLE in Google Chrome prior to 140.0.7339.185 allowed a remote attacker to potentially exploit heap corruption via malicious network traffic. (Chromium security severity: High) |
| Side-channel information leakage in V8 in Google Chrome prior to 140.0.7339.207 allowed a remote attacker to leak cross-origin data via a crafted HTML page. (Chromium security severity: High) |
| Integer overflow in V8 in Google Chrome prior to 140.0.7339.207 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) |
| Integer overflow in V8 in Google Chrome prior to 140.0.7339.207 allowed a remote attacker to potentially exploit heap corruption via a crafted HTML page. (Chromium security severity: High) |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm: Ensure input to pfn_to_kaddr() is treated as a 64-bit type
On 64-bit platforms, the pfn_to_kaddr() macro requires that the input
value is 64 bits in order to ensure that valid address bits don't get
lost when shifting that input by PAGE_SHIFT to calculate the physical
address to provide a virtual address for.
One such example is in pvalidate_pages() (used by SEV-SNP guests), where
the GFN in the struct used for page-state change requests is a 40-bit
bit-field, so attempts to pass this GFN field directly into
pfn_to_kaddr() ends up causing guest crashes when dealing with addresses
above the 1TB range due to the above.
Fix this issue with SEV-SNP guests, as well as any similar cases that
might cause issues in current/future code, by using an inline function,
instead of a macro, so that the input is implicitly cast to the
expected 64-bit input type prior to performing the shift operation.
While it might be argued that the issue is on the caller side, other
archs/macros have taken similar approaches to deal with instances like
this, such as ARM explicitly casting the input to phys_addr_t:
e48866647b48 ("ARM: 8396/1: use phys_addr_t in pfn_to_kaddr()")
A C inline function is even better though.
[ mingo: Refined the changelog some more & added __always_inline. ] |
| IBM Lakehouse (watsonx.data 2.2) could allow an authenticated user to obtain sensitive server component version information which could aid in further attacks against the system. |
| IBM Lakehouse (watsonx.data 2.2) could allow an authenticated privileged user to execute arbitrary commands on the system due to improper validation of user supplied input. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Add oversize check before call kvcalloc()
Commit 7661809d493b ("mm: don't allow oversized kvmalloc() calls") add the
oversize check. When the allocation is larger than what kmalloc() supports,
the following warning triggered:
WARNING: CPU: 0 PID: 8408 at mm/util.c:597 kvmalloc_node+0x108/0x110 mm/util.c:597
Modules linked in:
CPU: 0 PID: 8408 Comm: syz-executor221 Not tainted 5.14.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:kvmalloc_node+0x108/0x110 mm/util.c:597
Call Trace:
kvmalloc include/linux/mm.h:806 [inline]
kvmalloc_array include/linux/mm.h:824 [inline]
kvcalloc include/linux/mm.h:829 [inline]
check_btf_line kernel/bpf/verifier.c:9925 [inline]
check_btf_info kernel/bpf/verifier.c:10049 [inline]
bpf_check+0xd634/0x150d0 kernel/bpf/verifier.c:13759
bpf_prog_load kernel/bpf/syscall.c:2301 [inline]
__sys_bpf+0x11181/0x126e0 kernel/bpf/syscall.c:4587
__do_sys_bpf kernel/bpf/syscall.c:4691 [inline]
__se_sys_bpf kernel/bpf/syscall.c:4689 [inline]
__x64_sys_bpf+0x78/0x90 kernel/bpf/syscall.c:4689
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x3d/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: Fix DSP oops stack dump output contents
Fix @buf arg given to hex_dump_to_buffer() and stack address used
in dump error output. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: schedutil: Use kobject release() method to free sugov_tunables
The struct sugov_tunables is protected by the kobject, so we can't free
it directly. Otherwise we would get a call trace like this:
ODEBUG: free active (active state 0) object type: timer_list hint: delayed_work_timer_fn+0x0/0x30
WARNING: CPU: 3 PID: 720 at lib/debugobjects.c:505 debug_print_object+0xb8/0x100
Modules linked in:
CPU: 3 PID: 720 Comm: a.sh Tainted: G W 5.14.0-rc1-next-20210715-yocto-standard+ #507
Hardware name: Marvell OcteonTX CN96XX board (DT)
pstate: 40400009 (nZcv daif +PAN -UAO -TCO BTYPE=--)
pc : debug_print_object+0xb8/0x100
lr : debug_print_object+0xb8/0x100
sp : ffff80001ecaf910
x29: ffff80001ecaf910 x28: ffff00011b10b8d0 x27: ffff800011043d80
x26: ffff00011a8f0000 x25: ffff800013cb3ff0 x24: 0000000000000000
x23: ffff80001142aa68 x22: ffff800011043d80 x21: ffff00010de46f20
x20: ffff800013c0c520 x19: ffff800011d8f5b0 x18: 0000000000000010
x17: 6e6968207473696c x16: 5f72656d6974203a x15: 6570797420746365
x14: 6a626f2029302065 x13: 303378302f307830 x12: 2b6e665f72656d69
x11: ffff8000124b1560 x10: ffff800012331520 x9 : ffff8000100ca6b0
x8 : 000000000017ffe8 x7 : c0000000fffeffff x6 : 0000000000000001
x5 : ffff800011d8c000 x4 : ffff800011d8c740 x3 : 0000000000000000
x2 : ffff0001108301c0 x1 : ab3c90eedf9c0f00 x0 : 0000000000000000
Call trace:
debug_print_object+0xb8/0x100
__debug_check_no_obj_freed+0x1c0/0x230
debug_check_no_obj_freed+0x20/0x88
slab_free_freelist_hook+0x154/0x1c8
kfree+0x114/0x5d0
sugov_exit+0xbc/0xc0
cpufreq_exit_governor+0x44/0x90
cpufreq_set_policy+0x268/0x4a8
store_scaling_governor+0xe0/0x128
store+0xc0/0xf0
sysfs_kf_write+0x54/0x80
kernfs_fop_write_iter+0x128/0x1c0
new_sync_write+0xf0/0x190
vfs_write+0x2d4/0x478
ksys_write+0x74/0x100
__arm64_sys_write+0x24/0x30
invoke_syscall.constprop.0+0x54/0xe0
do_el0_svc+0x64/0x158
el0_svc+0x2c/0xb0
el0t_64_sync_handler+0xb0/0xb8
el0t_64_sync+0x198/0x19c
irq event stamp: 5518
hardirqs last enabled at (5517): [<ffff8000100cbd7c>] console_unlock+0x554/0x6c8
hardirqs last disabled at (5518): [<ffff800010fc0638>] el1_dbg+0x28/0xa0
softirqs last enabled at (5504): [<ffff8000100106e0>] __do_softirq+0x4d0/0x6c0
softirqs last disabled at (5483): [<ffff800010049548>] irq_exit+0x1b0/0x1b8
So split the original sugov_tunables_free() into two functions,
sugov_clear_global_tunables() is just used to clear the global_tunables
and the new sugov_tunables_free() is used as kobj_type::release to
release the sugov_tunables safely. |
| In the Linux kernel, the following vulnerability has been resolved:
mac80211: limit injected vht mcs/nss in ieee80211_parse_tx_radiotap
Limit max values for vht mcs and nss in ieee80211_parse_tx_radiotap
routine in order to fix the following warning reported by syzbot:
WARNING: CPU: 0 PID: 10717 at include/net/mac80211.h:989 ieee80211_rate_set_vht include/net/mac80211.h:989 [inline]
WARNING: CPU: 0 PID: 10717 at include/net/mac80211.h:989 ieee80211_parse_tx_radiotap+0x101e/0x12d0 net/mac80211/tx.c:2244
Modules linked in:
CPU: 0 PID: 10717 Comm: syz-executor.5 Not tainted 5.14.0-syzkaller #0
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
RIP: 0010:ieee80211_rate_set_vht include/net/mac80211.h:989 [inline]
RIP: 0010:ieee80211_parse_tx_radiotap+0x101e/0x12d0 net/mac80211/tx.c:2244
RSP: 0018:ffffc9000186f3e8 EFLAGS: 00010216
RAX: 0000000000000618 RBX: ffff88804ef76500 RCX: ffffc900143a5000
RDX: 0000000000040000 RSI: ffffffff888f478e RDI: 0000000000000003
RBP: 00000000ffffffff R08: 0000000000000000 R09: 0000000000000100
R10: ffffffff888f46f9 R11: 0000000000000000 R12: 00000000fffffff8
R13: ffff88804ef7653c R14: 0000000000000001 R15: 0000000000000004
FS: 00007fbf5718f700(0000) GS:ffff8880b9c00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b2de23000 CR3: 000000006a671000 CR4: 00000000001506f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000600
Call Trace:
ieee80211_monitor_select_queue+0xa6/0x250 net/mac80211/iface.c:740
netdev_core_pick_tx+0x169/0x2e0 net/core/dev.c:4089
__dev_queue_xmit+0x6f9/0x3710 net/core/dev.c:4165
__bpf_tx_skb net/core/filter.c:2114 [inline]
__bpf_redirect_no_mac net/core/filter.c:2139 [inline]
__bpf_redirect+0x5ba/0xd20 net/core/filter.c:2162
____bpf_clone_redirect net/core/filter.c:2429 [inline]
bpf_clone_redirect+0x2ae/0x420 net/core/filter.c:2401
bpf_prog_eeb6f53a69e5c6a2+0x59/0x234
bpf_dispatcher_nop_func include/linux/bpf.h:717 [inline]
__bpf_prog_run include/linux/filter.h:624 [inline]
bpf_prog_run include/linux/filter.h:631 [inline]
bpf_test_run+0x381/0xa30 net/bpf/test_run.c:119
bpf_prog_test_run_skb+0xb84/0x1ee0 net/bpf/test_run.c:663
bpf_prog_test_run kernel/bpf/syscall.c:3307 [inline]
__sys_bpf+0x2137/0x5df0 kernel/bpf/syscall.c:4605
__do_sys_bpf kernel/bpf/syscall.c:4691 [inline]
__se_sys_bpf kernel/bpf/syscall.c:4689 [inline]
__x64_sys_bpf+0x75/0xb0 kernel/bpf/syscall.c:4689
do_syscall_x64 arch/x86/entry/common.c:50 [inline]
do_syscall_64+0x35/0xb0 arch/x86/entry/common.c:80
entry_SYSCALL_64_after_hwframe+0x44/0xae
RIP: 0033:0x4665f9 |
| In the Linux kernel, the following vulnerability has been resolved:
mac80211-hwsim: fix late beacon hrtimer handling
Thomas explained in https://lore.kernel.org/r/87mtoeb4hb.ffs@tglx
that our handling of the hrtimer here is wrong: If the timer fires
late (e.g. due to vCPU scheduling, as reported by Dmitry/syzbot)
then it tries to actually rearm the timer at the next deadline,
which might be in the past already:
1 2 3 N N+1
| | | ... | |
^ intended to fire here (1)
^ next deadline here (2)
^ actually fired here
The next time it fires, it's later, but will still try to schedule
for the next deadline (now 3), etc. until it catches up with N,
but that might take a long time, causing stalls etc.
Now, all of this is simulation, so we just have to fix it, but
note that the behaviour is wrong even per spec, since there's no
value then in sending all those beacons unaligned - they should be
aligned to the TBTT (1, 2, 3, ... in the picture), and if we're a
bit (or a lot) late, then just resume at that point.
Therefore, change the code to use hrtimer_forward_now() which will
ensure that the next firing of the timer would be at N+1 (in the
picture), i.e. the next interval point after the current time. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hns3: do not allow call hns3_nic_net_open repeatedly
hns3_nic_net_open() is not allowed to called repeatly, but there
is no checking for this. When doing device reset and setup tc
concurrently, there is a small oppotunity to call hns3_nic_net_open
repeatedly, and cause kernel bug by calling napi_enable twice.
The calltrace information is like below:
[ 3078.222780] ------------[ cut here ]------------
[ 3078.230255] kernel BUG at net/core/dev.c:6991!
[ 3078.236224] Internal error: Oops - BUG: 0 [#1] PREEMPT SMP
[ 3078.243431] Modules linked in: hns3 hclgevf hclge hnae3 vfio_iommu_type1 vfio_pci vfio_virqfd vfio pv680_mii(O)
[ 3078.258880] CPU: 0 PID: 295 Comm: kworker/u8:5 Tainted: G O 5.14.0-rc4+ #1
[ 3078.269102] Hardware name: , BIOS KpxxxFPGA 1P B600 V181 08/12/2021
[ 3078.276801] Workqueue: hclge hclge_service_task [hclge]
[ 3078.288774] pstate: 60400009 (nZCv daif +PAN -UAO -TCO BTYPE=--)
[ 3078.296168] pc : napi_enable+0x80/0x84
tc qdisc sho[w 3d0e7v8 .e3t0h218 79] lr : hns3_nic_net_open+0x138/0x510 [hns3]
[ 3078.314771] sp : ffff8000108abb20
[ 3078.319099] x29: ffff8000108abb20 x28: 0000000000000000 x27: ffff0820a8490300
[ 3078.329121] x26: 0000000000000001 x25: ffff08209cfc6200 x24: 0000000000000000
[ 3078.339044] x23: ffff0820a8490300 x22: ffff08209cd76000 x21: ffff0820abfe3880
[ 3078.349018] x20: 0000000000000000 x19: ffff08209cd76900 x18: 0000000000000000
[ 3078.358620] x17: 0000000000000000 x16: ffffc816e1727a50 x15: 0000ffff8f4ff930
[ 3078.368895] x14: 0000000000000000 x13: 0000000000000000 x12: 0000259e9dbeb6b4
[ 3078.377987] x11: 0096a8f7e764eb40 x10: 634615ad28d3eab5 x9 : ffffc816ad8885b8
[ 3078.387091] x8 : ffff08209cfc6fb8 x7 : ffff0820ac0da058 x6 : ffff0820a8490344
[ 3078.396356] x5 : 0000000000000140 x4 : 0000000000000003 x3 : ffff08209cd76938
[ 3078.405365] x2 : 0000000000000000 x1 : 0000000000000010 x0 : ffff0820abfe38a0
[ 3078.414657] Call trace:
[ 3078.418517] napi_enable+0x80/0x84
[ 3078.424626] hns3_reset_notify_up_enet+0x78/0xd0 [hns3]
[ 3078.433469] hns3_reset_notify+0x64/0x80 [hns3]
[ 3078.441430] hclge_notify_client+0x68/0xb0 [hclge]
[ 3078.450511] hclge_reset_rebuild+0x524/0x884 [hclge]
[ 3078.458879] hclge_reset_service_task+0x3c4/0x680 [hclge]
[ 3078.467470] hclge_service_task+0xb0/0xb54 [hclge]
[ 3078.475675] process_one_work+0x1dc/0x48c
[ 3078.481888] worker_thread+0x15c/0x464
[ 3078.487104] kthread+0x160/0x170
[ 3078.492479] ret_from_fork+0x10/0x18
[ 3078.498785] Code: c8027c81 35ffffa2 d50323bf d65f03c0 (d4210000)
[ 3078.506889] ---[ end trace 8ebe0340a1b0fb44 ]---
Once hns3_nic_net_open() is excute success, the flag
HNS3_NIC_STATE_DOWN will be cleared. So add checking for this
flag, directly return when HNS3_NIC_STATE_DOWN is no set. |
| Lobe Chat is an open-source artificial intelligence chat framework. Prior to version 1.129.4, there is a a cross-site scripting (XSS) vulnerability when handling chat message in lobe-chat that can be escalated to remote code execution on the user’s machine. In lobe-chat, when the response from the server is like <lobeArtifact identifier="ai-new-interpretation" ...> , it will be rendered with the lobeArtifact node, instead of the plain text. However, when the type of the lobeArtifact is image/svg+xml , it will be rendered as the SVGRender component, which internally uses dangerouslySetInnerHTML to set the content of the svg, resulting in XSS attack. Any party capable of injecting content into chat messages, such as hosting a malicious page for prompt injection, operating a compromised MCP server, or leveraging tool integrations, can exploit this vulnerability. This vulnerability is fixed in 1.129.4. |
