| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/MSI: Handle lack of irqdomain gracefully
Alexandre observed a warning emitted from pci_msi_setup_msi_irqs() on a
RISCV platform which does not provide PCI/MSI support:
WARNING: CPU: 1 PID: 1 at drivers/pci/msi/msi.h:121 pci_msi_setup_msi_irqs+0x2c/0x32
__pci_enable_msix_range+0x30c/0x596
pci_msi_setup_msi_irqs+0x2c/0x32
pci_alloc_irq_vectors_affinity+0xb8/0xe2
RISCV uses hierarchical interrupt domains and correctly does not implement
the legacy fallback. The warning triggers from the legacy fallback stub.
That warning is bogus as the PCI/MSI layer knows whether a PCI/MSI parent
domain is associated with the device or not. There is a check for MSI-X,
which has a legacy assumption. But that legacy fallback assumption is only
valid when legacy support is enabled, but otherwise the check should simply
return -ENOTSUPP.
Loongarch tripped over the same problem and blindly enabled legacy support
without implementing the legacy fallbacks. There are weak implementations
which return an error, so the problem was papered over.
Correct pci_msi_domain_supports() to evaluate the legacy mode and add
the missing supported check into the MSI enable path to complete it. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btusb: mediatek: add intf release flow when usb disconnect
MediaTek claim an special usb intr interface for ISO data transmission.
The interface need to be released before unregistering hci device when
usb disconnect. Removing BT usb dongle without properly releasing the
interface may cause Kernel panic while unregister hci device. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/gfx9: Add Cleaner Shader Deinitialization in gfx_v9_0 Module
This commit addresses an omission in the previous patch related to the
cleaner shader support for GFX9 hardware. Specifically, it adds the
necessary deinitialization code for the cleaner shader in the
gfx_v9_0_sw_fini function.
The added line amdgpu_gfx_cleaner_shader_sw_fini(adev); ensures that any
allocated resources for the cleaner shader are freed correctly, avoiding
potential memory leaks and ensuring that the GPU state is clean for the
next initialization sequence. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/gr/gf100: Fix missing unlock in gf100_gr_chan_new()
When the call to gf100_grctx_generate() fails, unlock gr->fecs.mutex
before returning the error.
Fixes smatch warning:
drivers/gpu/drm/nouveau/nvkm/engine/gr/gf100.c:480 gf100_gr_chan_new() warn: inconsistent returns '&gr->fecs.mutex'. |
| In the Linux kernel, the following vulnerability has been resolved:
erofs: fix blksize < PAGE_SIZE for file-backed mounts
Adjust sb->s_blocksize{,_bits} directly for file-backed
mounts when the fs block size is smaller than PAGE_SIZE.
Previously, EROFS used sb_set_blocksize(), which caused
a panic if bdev-backed mounts is not used. |
| In the Linux kernel, the following vulnerability has been resolved:
dlm: fix dlm_recover_members refcount on error
If dlm_recover_members() fails we don't drop the references of the
previous created root_list that holds and keep all rsbs alive during the
recovery. It might be not an unlikely event because ping_members() could
run into an -EINTR if another recovery progress was triggered again. |
| In the Linux kernel, the following vulnerability has been resolved:
nfs_common: must not hold RCU while calling nfsd_file_put_local
Move holding the RCU from nfs_to_nfsd_file_put_local to
nfs_to_nfsd_net_put. It is the call to nfs_to->nfsd_serv_put that
requires the RCU anyway (the puts for nfsd_file and netns were
combined to avoid an extra indirect reference but that
micro-optimization isn't possible now).
This fixes xfstests generic/013 and it triggering:
"Voluntary context switch within RCU read-side critical section!"
[ 143.545738] Call Trace:
[ 143.546206] <TASK>
[ 143.546625] ? show_regs+0x6d/0x80
[ 143.547267] ? __warn+0x91/0x140
[ 143.547951] ? rcu_note_context_switch+0x496/0x5d0
[ 143.548856] ? report_bug+0x193/0x1a0
[ 143.549557] ? handle_bug+0x63/0xa0
[ 143.550214] ? exc_invalid_op+0x1d/0x80
[ 143.550938] ? asm_exc_invalid_op+0x1f/0x30
[ 143.551736] ? rcu_note_context_switch+0x496/0x5d0
[ 143.552634] ? wakeup_preempt+0x62/0x70
[ 143.553358] __schedule+0xaa/0x1380
[ 143.554025] ? _raw_spin_unlock_irqrestore+0x12/0x40
[ 143.554958] ? try_to_wake_up+0x1fe/0x6b0
[ 143.555715] ? wake_up_process+0x19/0x20
[ 143.556452] schedule+0x2e/0x120
[ 143.557066] schedule_preempt_disabled+0x19/0x30
[ 143.557933] rwsem_down_read_slowpath+0x24d/0x4a0
[ 143.558818] ? xfs_efi_item_format+0x50/0xc0 [xfs]
[ 143.559894] down_read+0x4e/0xb0
[ 143.560519] xlog_cil_commit+0x1b2/0xbc0 [xfs]
[ 143.561460] ? _raw_spin_unlock+0x12/0x30
[ 143.562212] ? xfs_inode_item_precommit+0xc7/0x220 [xfs]
[ 143.563309] ? xfs_trans_run_precommits+0x69/0xd0 [xfs]
[ 143.564394] __xfs_trans_commit+0xb5/0x330 [xfs]
[ 143.565367] xfs_trans_roll+0x48/0xc0 [xfs]
[ 143.566262] xfs_defer_trans_roll+0x57/0x100 [xfs]
[ 143.567278] xfs_defer_finish_noroll+0x27a/0x490 [xfs]
[ 143.568342] xfs_defer_finish+0x1a/0x80 [xfs]
[ 143.569267] xfs_bunmapi_range+0x4d/0xb0 [xfs]
[ 143.570208] xfs_itruncate_extents_flags+0x13d/0x230 [xfs]
[ 143.571353] xfs_free_eofblocks+0x12e/0x190 [xfs]
[ 143.572359] xfs_file_release+0x12d/0x140 [xfs]
[ 143.573324] __fput+0xe8/0x2d0
[ 143.573922] __fput_sync+0x1d/0x30
[ 143.574574] nfsd_filp_close+0x33/0x60 [nfsd]
[ 143.575430] nfsd_file_free+0x96/0x150 [nfsd]
[ 143.576274] nfsd_file_put+0xf7/0x1a0 [nfsd]
[ 143.577104] nfsd_file_put_local+0x18/0x30 [nfsd]
[ 143.578070] nfs_close_local_fh+0x101/0x110 [nfs_localio]
[ 143.579079] __put_nfs_open_context+0xc9/0x180 [nfs]
[ 143.580031] nfs_file_clear_open_context+0x4a/0x60 [nfs]
[ 143.581038] nfs_file_release+0x3e/0x60 [nfs]
[ 143.581879] __fput+0xe8/0x2d0
[ 143.582464] __fput_sync+0x1d/0x30
[ 143.583108] __x64_sys_close+0x41/0x80
[ 143.583823] x64_sys_call+0x189a/0x20d0
[ 143.584552] do_syscall_64+0x64/0x170
[ 143.585240] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 143.586185] RIP: 0033:0x7f3c5153efd7 |
| In the Linux kernel, the following vulnerability has been resolved:
nfs/localio: must clear res.replen in nfs_local_read_done
Otherwise memory corruption can occur due to NFSv3 LOCALIO reads
leaving garbage in res.replen:
- nfs3_read_done() copies that into server->read_hdrsize; from there
nfs3_proc_read_setup() copies it to args.replen in new requests.
- nfs3_xdr_enc_read3args() passes that to rpc_prepare_reply_pages()
which includes it in hdrsize for xdr_init_pages, so that rq_rcv_buf
contains a ridiculous len.
- This is copied to rq_private_buf and xs_read_stream_request()
eventually passes the kvec to sock_recvmsg() which receives incoming
data into entirely the wrong place.
This is easily reproduced with NFSv3 LOCALIO that is servicing reads
when it is made to pivot back to using normal RPC. This switch back
to using normal NFSv3 with RPC can occur for a few reasons but this
issue was exposed with a test that stops and then restarts the NFSv3
server while LOCALIO is performing heavy read IO. |
| In the Linux kernel, the following vulnerability has been resolved:
net/9p/usbg: fix handling of the failed kzalloc() memory allocation
On the linux-next, next-20241108 vanilla kernel, the coccinelle tool gave the
following error report:
./net/9p/trans_usbg.c:912:5-11: ERROR: allocation function on line 911 returns
NULL not ERR_PTR on failure
kzalloc() failure is fixed to handle the NULL return case on the memory exhaustion. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: Initialize cfid->tcon before performing network ops
Avoid leaking a tcon ref when a lease break races with opening the
cached directory. Processing the leak break might take a reference to
the tcon in cached_dir_lease_break() and then fail to release the ref in
cached_dir_offload_close, since cfid->tcon is still NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/CPU/AMD: Terminate the erratum_1386_microcode array
The erratum_1386_microcode array requires an empty entry at the end.
Otherwise x86_match_cpu_with_stepping() will continue iterate the array after
it ended.
Add an empty entry to erratum_1386_microcode to its end. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: fix TSO DMA API usage causing oops
Commit 66600fac7a98 ("net: stmmac: TSO: Fix unbalanced DMA map/unmap
for non-paged SKB data") moved the assignment of tx_skbuff_dma[]'s
members to be later in stmmac_tso_xmit().
The buf (dma cookie) and len stored in this structure are passed to
dma_unmap_single() by stmmac_tx_clean(). The DMA API requires that
the dma cookie passed to dma_unmap_single() is the same as the value
returned from dma_map_single(). However, by moving the assignment
later, this is not the case when priv->dma_cap.addr64 > 32 as "des"
is offset by proto_hdr_len.
This causes problems such as:
dwc-eth-dwmac 2490000.ethernet eth0: Tx DMA map failed
and with DMA_API_DEBUG enabled:
DMA-API: dwc-eth-dwmac 2490000.ethernet: device driver tries to +free DMA memory it has not allocated [device address=0x000000ffffcf65c0] [size=66 bytes]
Fix this by maintaining "des" as the original DMA cookie, and use
tso_des to pass the offset DMA cookie to stmmac_tso_allocator().
Full details of the crashes can be found at:
https://lore.kernel.org/all/d8112193-0386-4e14-b516-37c2d838171a@nvidia.com/
https://lore.kernel.org/all/klkzp5yn5kq5efgtrow6wbvnc46bcqfxs65nz3qy77ujr5turc@bwwhelz2l4dw/ |
| In the Linux kernel, the following vulnerability has been resolved:
drm/panel: himax-hx83102: Add a check to prevent NULL pointer dereference
drm_mode_duplicate() could return NULL due to lack of memory,
which will then call NULL pointer dereference. Add a check to
prevent it. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Mark raw_tp arguments with PTR_MAYBE_NULL
Arguments to a raw tracepoint are tagged as trusted, which carries the
semantics that the pointer will be non-NULL. However, in certain cases,
a raw tracepoint argument may end up being NULL. More context about this
issue is available in [0].
Thus, there is a discrepancy between the reality, that raw_tp arguments
can actually be NULL, and the verifier's knowledge, that they are never
NULL, causing explicit NULL checks to be deleted, and accesses to such
pointers potentially crashing the kernel.
To fix this, mark raw_tp arguments as PTR_MAYBE_NULL, and then special
case the dereference and pointer arithmetic to permit it, and allow
passing them into helpers/kfuncs; these exceptions are made for raw_tp
programs only. Ensure that we don't do this when ref_obj_id > 0, as in
that case this is an acquired object and doesn't need such adjustment.
The reason we do mask_raw_tp_trusted_reg logic is because other will
recheck in places whether the register is a trusted_reg, and then
consider our register as untrusted when detecting the presence of the
PTR_MAYBE_NULL flag.
To allow safe dereference, we enable PROBE_MEM marking when we see loads
into trusted pointers with PTR_MAYBE_NULL.
While trusted raw_tp arguments can also be passed into helpers or kfuncs
where such broken assumption may cause issues, a future patch set will
tackle their case separately, as PTR_TO_BTF_ID (without PTR_TRUSTED) can
already be passed into helpers and causes similar problems. Thus, they
are left alone for now.
It is possible that these checks also permit passing non-raw_tp args
that are trusted PTR_TO_BTF_ID with null marking. In such a case,
allowing dereference when pointer is NULL expands allowed behavior, so
won't regress existing programs, and the case of passing these into
helpers is the same as above and will be dealt with later.
Also update the failure case in tp_btf_nullable selftest to capture the
new behavior, as the verifier will no longer cause an error when
directly dereference a raw tracepoint argument marked as __nullable.
[0]: https://lore.kernel.org/bpf/ZrCZS6nisraEqehw@jlelli-thinkpadt14gen4.remote.csb |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: Fix the memory allocation issue in amdgpu_discovery_get_nps_info()
Fix two issues with memory allocation in amdgpu_discovery_get_nps_info()
for mem_ranges:
- Add a check for allocation failure to avoid dereferencing a null
pointer.
- As suggested by Christophe, use kvcalloc() for memory allocation,
which checks for multiplication overflow.
Additionally, assign the output parameters nps_type and range_cnt after
the kvcalloc() call to prevent modifying the output parameters in case
of an error return. |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: core: Fix possible NULL dereference caused by kunit_kzalloc()
kunit_kzalloc() may return a NULL pointer, dereferencing it without
NULL check may lead to NULL dereference.
Add NULL checks for all the kunit_kzalloc() in sound_kunit.c |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdkfd: Use dynamic allocation for CU occupancy array in 'kfd_get_cu_occupancy()'
The `kfd_get_cu_occupancy` function previously declared a large
`cu_occupancy` array as a local variable, which could lead to stack
overflows due to excessive stack usage. This commit replaces the static
array allocation with dynamic memory allocation using `kcalloc`,
thereby reducing the stack size.
This change avoids the risk of stack overflows in kernel space, in
scenarios where `AMDGPU_MAX_QUEUES` is large. The allocated memory is
freed using `kfree` before the function returns to prevent memory
leaks.
Fixes the below with gcc W=1:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_process.c: In function ‘kfd_get_cu_occupancy’:
drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_process.c:322:1: warning: the frame size of 1056 bytes is larger than 1024 bytes [-Wframe-larger-than=]
322 | }
| ^ |
| In the Linux kernel, the following vulnerability has been resolved:
f2fs: fix to do sanity check on node blkaddr in truncate_node()
syzbot reports a f2fs bug as below:
------------[ cut here ]------------
kernel BUG at fs/f2fs/segment.c:2534!
RIP: 0010:f2fs_invalidate_blocks+0x35f/0x370 fs/f2fs/segment.c:2534
Call Trace:
truncate_node+0x1ae/0x8c0 fs/f2fs/node.c:909
f2fs_remove_inode_page+0x5c2/0x870 fs/f2fs/node.c:1288
f2fs_evict_inode+0x879/0x15c0 fs/f2fs/inode.c:856
evict+0x4e8/0x9b0 fs/inode.c:723
f2fs_handle_failed_inode+0x271/0x2e0 fs/f2fs/inode.c:986
f2fs_create+0x357/0x530 fs/f2fs/namei.c:394
lookup_open fs/namei.c:3595 [inline]
open_last_lookups fs/namei.c:3694 [inline]
path_openat+0x1c03/0x3590 fs/namei.c:3930
do_filp_open+0x235/0x490 fs/namei.c:3960
do_sys_openat2+0x13e/0x1d0 fs/open.c:1415
do_sys_open fs/open.c:1430 [inline]
__do_sys_openat fs/open.c:1446 [inline]
__se_sys_openat fs/open.c:1441 [inline]
__x64_sys_openat+0x247/0x2a0 fs/open.c:1441
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0010:f2fs_invalidate_blocks+0x35f/0x370 fs/f2fs/segment.c:2534
The root cause is: on a fuzzed image, blkaddr in nat entry may be
corrupted, then it will cause system panic when using it in
f2fs_invalidate_blocks(), to avoid this, let's add sanity check on
nat blkaddr in truncate_node(). |
| In the Linux kernel, the following vulnerability has been resolved:
irqchip/riscv-aplic: Prevent crash when MSI domain is missing
If the APLIC driver is probed before the IMSIC driver, the parent MSI
domain will be missing, which causes a NULL pointer dereference in
msi_create_device_irq_domain().
Avoid this by deferring probe until the parent MSI domain is available. Use
dev_err_probe() to avoid printing an error message when returning
-EPROBE_DEFER. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_net: correct netdev_tx_reset_queue() invocation point
When virtnet_close is followed by virtnet_open, some TX completions can
possibly remain unconsumed, until they are finally processed during the
first NAPI poll after the netdev_tx_reset_queue(), resulting in a crash
[1]. Commit b96ed2c97c79 ("virtio_net: move netdev_tx_reset_queue() call
before RX napi enable") was not sufficient to eliminate all BQL crash
cases for virtio-net.
This issue can be reproduced with the latest net-next master by running:
`while :; do ip l set DEV down; ip l set DEV up; done` under heavy network
TX load from inside the machine.
netdev_tx_reset_queue() can actually be dropped from virtnet_open path;
the device is not stopped in any case. For BQL core part, it's just like
traffic nearly ceases to exist for some period. For stall detector added
to BQL, even if virtnet_close could somehow lead to some TX completions
delayed for long, followed by virtnet_open, we can just take it as stall
as mentioned in commit 6025b9135f7a ("net: dqs: add NIC stall detector
based on BQL"). Note also that users can still reset stall_max via sysfs.
So, drop netdev_tx_reset_queue() from virtnet_enable_queue_pair(). This
eliminates the BQL crashes. As a result, netdev_tx_reset_queue() is now
explicitly required in freeze/restore path. This patch adds it to
immediately after free_unused_bufs(), following the rule of thumb:
netdev_tx_reset_queue() should follow any SKB freeing not followed by
netdev_tx_completed_queue(). This seems the most consistent and
streamlined approach, and now netdev_tx_reset_queue() runs whenever
free_unused_bufs() is done.
[1]:
------------[ cut here ]------------
kernel BUG at lib/dynamic_queue_limits.c:99!
Oops: invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
CPU: 7 UID: 0 PID: 1598 Comm: ip Tainted: G N 6.12.0net-next_main+ #2
Tainted: [N]=TEST
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), \
BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
RIP: 0010:dql_completed+0x26b/0x290
Code: b7 c2 49 89 e9 44 89 da 89 c6 4c 89 d7 e8 ed 17 47 00 58 65 ff 0d
4d 27 90 7e 0f 85 fd fe ff ff e8 ea 53 8d ff e9 f3 fe ff ff <0f> 0b 01
d2 44 89 d1 29 d1 ba 00 00 00 00 0f 48 ca e9 28 ff ff ff
RSP: 0018:ffffc900002b0d08 EFLAGS: 00010297
RAX: 0000000000000000 RBX: ffff888102398c80 RCX: 0000000080190009
RDX: 0000000000000000 RSI: 000000000000006a RDI: 0000000000000000
RBP: ffff888102398c00 R08: 0000000000000000 R09: 0000000000000000
R10: 00000000000000ca R11: 0000000000015681 R12: 0000000000000001
R13: ffffc900002b0d68 R14: ffff88811115e000 R15: ffff8881107aca40
FS: 00007f41ded69500(0000) GS:ffff888667dc0000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000556ccc2dc1a0 CR3: 0000000104fd8003 CR4: 0000000000772ef0
PKRU: 55555554
Call Trace:
<IRQ>
? die+0x32/0x80
? do_trap+0xd9/0x100
? dql_completed+0x26b/0x290
? dql_completed+0x26b/0x290
? do_error_trap+0x6d/0xb0
? dql_completed+0x26b/0x290
? exc_invalid_op+0x4c/0x60
? dql_completed+0x26b/0x290
? asm_exc_invalid_op+0x16/0x20
? dql_completed+0x26b/0x290
__free_old_xmit+0xff/0x170 [virtio_net]
free_old_xmit+0x54/0xc0 [virtio_net]
virtnet_poll+0xf4/0xe30 [virtio_net]
? __update_load_avg_cfs_rq+0x264/0x2d0
? update_curr+0x35/0x260
? reweight_entity+0x1be/0x260
__napi_poll.constprop.0+0x28/0x1c0
net_rx_action+0x329/0x420
? enqueue_hrtimer+0x35/0x90
? trace_hardirqs_on+0x1d/0x80
? kvm_sched_clock_read+0xd/0x20
? sched_clock+0xc/0x30
? kvm_sched_clock_read+0xd/0x20
? sched_clock+0xc/0x30
? sched_clock_cpu+0xd/0x1a0
handle_softirqs+0x138/0x3e0
do_softirq.part.0+0x89/0xc0
</IRQ>
<TASK>
__local_bh_enable_ip+0xa7/0xb0
virtnet_open+0xc8/0x310 [virtio_net]
__dev_open+0xfa/0x1b0
__dev_change_flags+0x1de/0x250
dev_change_flags+0x22/0x60
do_setlink.isra.0+0x2df/0x10b0
? rtnetlink_rcv_msg+0x34f/0x3f0
? netlink_rcv_skb+0x54/0x100
? netlink_unicas
---truncated--- |
