| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A weakness has been identified in H3C Magic B1 up to 100R004. The affected element is the function sub_44de0 of the file /goform/aspForm. This manipulation of the argument param causes buffer overflow. Remote exploitation of the attack is possible. The exploit has been made available to the public and could be exploited. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security flaw has been discovered in Grandstream GXP1625 1.0.7.4. The impacted element is an unknown function of the file /cgi-bin/api.values.post of the component Network Status Page. Performing manipulation of the argument vpn_ip results in basic cross site scripting. Remote exploitation of the attack is possible. The exploit has been released to the public and may be exploited. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was identified in Yonyou U8 Cloud 5.0/5.0sp/5.1/5.1sp. The affected element is an unknown function of the file nc/pubitf/erm/mobile/appservice/AppServletService.class. Such manipulation of the argument usercode leads to sql injection. The attack may be launched remotely. The exploit is publicly available and might be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A vulnerability was determined in SGAI Space1 NAS N1211DS up to 1.0.915. Impacted is the function RENAME_FILE/OPERATE_FILE/NGNIX_UPLOAD of the file /cgi-bin/JSONAPI of the component gsaiagent. This manipulation causes command injection. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| The CryptX plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's `cryptx` shortcode in all versions up to, and including, 4.0.4 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Trail Manager plugin for WordPress is vulnerable to Stored Cross-Site Scripting via admin settings in all versions up to, and including, 1.0.0 due to insufficient input sanitization and output escaping. This makes it possible for authenticated attackers, with administrator-level permissions and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. This only affects multi-site installations and installations where unfiltered_html has been disabled. |
| ReQuest Serious Play F3 Media Server versions 7.0.3.4968 (Pro), 7.0.2.4954, 6.5.2.4954, 6.4.2.4681, 6.3.2.4203, and 2.0.1.823 allows unauthenticated attackers to disclose the webserver's Python debug log file containing system information, credentials, paths, processes and command arguments running on the device. Attackers can access sensitive information by visiting the message_log page. |
| ReQuest Serious Play Media Player 3.0 contains an unauthenticated file disclosure vulnerability when input passed through the 'file' parameter in and script is not properly verified before being used to read web log files. Attackers can exploit this to disclose contents of files from local resources. |
| A vulnerability was identified in tushar-2223 Hotel-Management-System up to bb1f3b3666124b888f1e4bcf51b6fba9fbb01d15. The impacted element is an unknown function of the file /admin/invoiceprint.php. The manipulation of the argument ID leads to sql injection. It is possible to initiate the attack remotely. The exploit is publicly available and might be used. This product is using a rolling release to provide continious delivery. Therefore, no version details for affected nor updated releases are available. |
| Flexsense DiskBoss 11.7.28 allows unauthenticated attackers to elevate their privileges using any of its services, enabling remote code execution during startup or reboot with escalated privileges. Attackers can exploit the unquoted service path vulnerability by specifying a malicious service name in the 'sc qc' command, allowing them to execute arbitrary system commands. |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: avoid data corruption on cq descriptor number
Since commit 30f241fcf52a ("xsk: Fix immature cq descriptor
production"), the descriptor number is stored in skb control block and
xsk_cq_submit_addr_locked() relies on it to put the umem addrs onto
pool's completion queue.
skb control block shouldn't be used for this purpose as after transmit
xsk doesn't have control over it and other subsystems could use it. This
leads to the following kernel panic due to a NULL pointer dereference.
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: Oops: 0000 [#1] SMP NOPTI
CPU: 2 UID: 1 PID: 927 Comm: p4xsk.bin Not tainted 6.16.12+deb14-cloud-amd64 #1 PREEMPT(lazy) Debian 6.16.12-1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
RIP: 0010:xsk_destruct_skb+0xd0/0x180
[...]
Call Trace:
<IRQ>
? napi_complete_done+0x7a/0x1a0
ip_rcv_core+0x1bb/0x340
ip_rcv+0x30/0x1f0
__netif_receive_skb_one_core+0x85/0xa0
process_backlog+0x87/0x130
__napi_poll+0x28/0x180
net_rx_action+0x339/0x420
handle_softirqs+0xdc/0x320
? handle_edge_irq+0x90/0x1e0
do_softirq.part.0+0x3b/0x60
</IRQ>
<TASK>
__local_bh_enable_ip+0x60/0x70
__dev_direct_xmit+0x14e/0x1f0
__xsk_generic_xmit+0x482/0xb70
? __remove_hrtimer+0x41/0xa0
? __xsk_generic_xmit+0x51/0xb70
? _raw_spin_unlock_irqrestore+0xe/0x40
xsk_sendmsg+0xda/0x1c0
__sys_sendto+0x1ee/0x200
__x64_sys_sendto+0x24/0x30
do_syscall_64+0x84/0x2f0
? __pfx_pollwake+0x10/0x10
? __rseq_handle_notify_resume+0xad/0x4c0
? restore_fpregs_from_fpstate+0x3c/0x90
? switch_fpu_return+0x5b/0xe0
? do_syscall_64+0x204/0x2f0
? do_syscall_64+0x204/0x2f0
? do_syscall_64+0x204/0x2f0
entry_SYSCALL_64_after_hwframe+0x76/0x7e
</TASK>
[...]
Kernel panic - not syncing: Fatal exception in interrupt
Kernel Offset: 0x1c000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
Instead use the skb destructor_arg pointer along with pointer tagging.
As pointers are always aligned to 8B, use the bottom bit to indicate
whether this a single address or an allocated struct containing several
addresses. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: fix use-after-free due to MST port state bypass
syzbot reported[1] a use-after-free when deleting an expired fdb. It is
due to a race condition between learning still happening and a port being
deleted, after all its fdbs have been flushed. The port's state has been
toggled to disabled so no learning should happen at that time, but if we
have MST enabled, it will bypass the port's state, that together with VLAN
filtering disabled can lead to fdb learning at a time when it shouldn't
happen while the port is being deleted. VLAN filtering must be disabled
because we flush the port VLANs when it's being deleted which will stop
learning. This fix adds a check for the port's vlan group which is
initialized to NULL when the port is getting deleted, that avoids the port
state bypass. When MST is enabled there would be a minimal new overhead
in the fast-path because the port's vlan group pointer is cache-hot.
[1] https://syzkaller.appspot.com/bug?extid=dd280197f0f7ab3917be |
| A vulnerability was determined in TOZED ZLT M30S and ZLT M30S PRO 1.47/3.09.06. This impacts an unknown function of the file /reqproc/proc_post of the component Web Interface. Executing manipulation of the argument goformId with the input REBOOT_DEVICE can lead to denial of service. The attack can only be done within the local network. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
| The My auctions allegro plugin for WordPress is vulnerable to Local File Inclusion in all versions up to, and including, 3.6.32 via the 'controller' parameter. This makes it possible for unauthenticated attackers to include and execute arbitrary files on the server, allowing the execution of any PHP code in those files. This can be used to bypass access controls, obtain sensitive data, or achieve code execution in cases where images and other “safe” file types can be uploaded and included. |
| The Projectopia – WordPress Project Management plugin for WordPress is vulnerable to unauthorized modification of data due to a missing capability check on the pto_delete_file AJAX action in all versions up to, and including, 5.1.19. This makes it possible for unauthenticated attackers to delete arbitrary attachments. |
| The User Generator and Importer plugin for WordPress is vulnerable to Cross-Site Request Forgery in versions up to and including 1.2.2. This is due to missing nonce validation in the "Import Using CSV File" function. This makes it possible for unauthenticated attackers to elevate user privileges by creating arbitrary accounts with administrator privileges via a forged request, provided they can trick a site administrator into performing an action such as clicking on a link. |
| The Cool Tag Cloud plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the plugin's 'cool_tag_cloud' shortcode in all versions up to, and including, 2.29 due to insufficient input sanitization and output escaping on user supplied attributes. This makes it possible for authenticated attackers, with contributor level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| The Thai Lottery Widget plugin for WordPress is vulnerable to Stored Cross-Site Scripting via the `thailottery` shortcode in all versions up to, and including, 2.5. This is due to insufficient input sanitization and output escaping on the user supplied `width` and `height` shortcode attributes. This makes it possible for authenticated attackers, with Contributor-level access and above, to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_event: validate skb length for unknown CC opcode
In hci_cmd_complete_evt(), if the command complete event has an unknown
opcode, we assume the first byte of the remaining skb->data contains the
return status. However, parameter data has previously been pulled in
hci_event_func(), which may leave the skb empty. If so, using skb->data[0]
for the return status uses un-init memory.
The fix is to check skb->len before using skb->data. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: Implement gettimex64 with -EOPNOTSUPP
gve implemented a ptp_clock for sole use of do_aux_work at this time.
ptp_clock_gettime() and ptp_sys_offset() assume every ptp_clock has
implemented either gettimex64 or gettime64. Stub gettimex64 and return
-EOPNOTSUPP to prevent NULL dereferencing. |
